19th International Congress of Metrology (CIM2019)
Paris, France, September 24-26, 2019Sandrine Gazal (Ed.)
Processing Metrological Data / Traitement des Datas Métrologie
Open Access
The European Metrology Cloud: Impact of European Regulations on Data Protection and the Free Flow of Non-Personal Data 01001
Published online: 23 September 2019
Open Access
Calibration 4.0 – Information system for usage of digital calibration certificates 01002
Published online: 23 September 2019
Innovate Electrical Instrumentation / Instrumentation Electrique Innovante
Open Access
Practical Precision Electrical Impedance Measurement for the 21st Century – EMPIR Project 17RPT04 VersICal 02001
Published online: 23 September 2019
Open Access
Study of non-invasive instruments for the measurement of pulsed X-ray high voltage tube 02002
Published online: 23 September 2019
Open Access
EMPIR European project for validation of vector array SAR measurement systems 02003
Published online: 23 September 2019
Dimensional Metrology / Métrologie Dimensionnelle
Open Access
Deep learning and 3D optical metrology improve complex feature detection and ranking 03001
Published online: 23 September 2019
Quality and Accreditation / Qualité et Accréditation
Open Access
Calibration and measurement capability (CMC) and customer technical qualification 04001
Published online: 23 September 2019
Open Access
A Case Study on the Establishment of a National Quality Infrastructure in Korea 04002
Published online: 23 September 2019
Sustainable Environment / Environnement Durable
Open Access
The European metrology network for climate and ocean observation 05001
Published online: 23 September 2019
Open Access
Use of FTIR spectroscopy for the measurement of CO2 carbon stable isotope ratios 05002
Published online: 23 September 2019
Chemical Analysis / Analyses Chimiques
Open Access
Development of standardized methods for the analysis of amines, terpenes and ammonia in biomethane 06001
Published online: 23 September 2019
Open Access
Metrology for biomethane conformity assessment: measure trace gas impurities in biomethane 06002
Published online: 23 September 2019
Metrology For Health Care / Métrologie pour la Santé
Open Access
Metrological references for health care based on entropy 07001
Published online: 23 September 2019
Open Access
Development and metrological characterization of an aerosol generation device dedicated to inhalation toxicology studies: the nanopesticide case 07002
Published online: 23 September 2019
Energy Mix / Mix Energétique
Open Access
Fictive power source for calibrations in railway systems 08001
Published online: 23 September 2019
Open Access
Uncertainty calculation of indoor and outdoor performance measurements for PV modules 08002
Published online: 23 September 2019
Open Access
Piezoelectricity measurements of hybrid films functionalized with ZnO nanostructures and cellulose nanocrystals 08003
Published online: 23 September 2019
Dimensional / Dimensionnel
Open Access
Comparison of internal and external threads pitch diameter measurement by using conventional methods and CMM’s 09001
Published online: 23 September 2019
Open Access
Position accuracy and repeatability calibration of turn tables by using laser interferometers 09002
Published online: 23 September 2019
Open Access
How to reduce the workload of a traditional CMM and solve bottleneck issues 09003
Published online: 23 September 2019
Open Access
Investigation in optimisation of accuracy with non-contact systems by influencing variable processes 09004
Published online: 23 September 2019
Open Access
Calibration of articulating arm coordinate measuring machines per ASME B89.4.22-2004 09005
Published online: 23 September 2019
Open Access
Radius measurement and uncertainty evaluation using three-sphere reciprocity method 09006
Published online: 23 September 2019
Open Access
Task‐specific measurement uncertainty budget of Curvic‐coupling using analytical methods 09007
Published online: 23 September 2019
Traceability - Quality / Traçabilité - Qualité
Open Access
Proficiency testing for the calibration of masses 10001
Published online: 23 September 2019
Open Access
Challenges of achieving accreditation to ISO 6789-2:2017 – for the calibration of hand torque tools 10002
Published online: 23 September 2019
Open Access
Risk and opportunity management: an approach for the mechanical testing field 10003
Published online: 23 September 2019
Open Access
Inter-laboratory comparison on the calibration of measurements photometric and radiometric sensors 10004
Published online: 23 September 2019
Electricity / Electricité
Open Access
Investigation on automated Multiple Decade Ratios precision Divider for Generation of low DC Voltages 11001
Published online: 23 September 2019
Open Access
A versatile electrical impedance calibration laboratory based on a digital impedance bridge 11002
Published online: 23 September 2019
Open Access
Measurement setup to characterize electrical standards 11003
Published online: 23 September 2019
Open Access
New reference systems for the calibration of HV impulses at LNE 11004
Published online: 23 September 2019
Open Access
Traceability Features of the Electric Power Unit in Ukraine 11005
Published online: 23 September 2019
Open Access
Proficiency testing for calibration of multimeter 11006
Published online: 23 September 2019
Uncertainties / Incertitudes
Open Access
Choice of parameters for an R&R study and its impact on the measurement capability 12001
Published online: 23 September 2019
Open Access
Uncertainty calculations and calibration of metal hardness testing equipment 12002
Published online: 23 September 2019
Open Access
La derive dans l’évaluation de l’incertitude 12003
Published online: 23 September 2019
Open Access
Evaluate and quantify the drift of a measuring instrument 12004
Published online: 23 September 2019
Mechanical Quantities / Grandeurs Mécaniques
Open Access
Robustness studies of oscillation-type density meters with viscoelastic fluids 13002
Published online: 23 September 2019
Open Access
Microstructural and spectrophotometric analysis system for metal welding processes 13003
Published online: 23 September 2019
SI, what’s next? / SI, et maintenant ?
Open Access
Capacitance metrology at the BIPM to support National Metrology Institutes 14001
Published online: 23 September 2019
Open Access
A µKibble balance for direct realisation of small-scale masses and forces 14002
Published online: 23 September 2019
Science with Impact
Open Access
The TiFOON Project – Time and Frequency Over Optical Networks 15001
Published online: 23 September 2019
Open Access
Certified reference materials for breath alcohol control - the ALCOREF project 15002
Published online: 23 September 2019
Open Access
Primary reference in terms of air kerma for ionizing radiation fields produced by an electrostatic electron accelerator 15003
Published online: 23 September 2019
Open Access
New EMPIR project – Metrology for Drug Delivery 15004
Published online: 23 September 2019
Uncertainties: Toolbox / Incertitudes : Boîte à outils
Open Access
Risk calculations for conformity assessment in practice 16001
Published online: 23 September 2019
Open Access
Bayesian approach to uncertainty evaluation: is it always working? 16002
Published online: 23 September 2019
Open Access
Role of measurement uncertainty in conformity assessment 16003
Published online: 23 September 2019
Innovations in Flow / Innovations en débitmétrie
Open Access
Development of a dynamic gravimetric calibration method for liquid water flow metering 17001
Published online: 23 September 2019
Open Access
The influence of Gas Type on a Thermal Mass Flowmeter Calibration Results 17002
Published online: 23 September 2019
Open Access
Experimental and numerical investigations on the shape and roughness of cylindrical critical flow venturi nozzles (CFVN) 17003
Published online: 23 September 2019
Temperature / Température
Open Access
Overview of measurements capabilities in radiation thermometry at CEM (Spain) 18001
Published online: 23 September 2019
Open Access
A new set-up for the calibration of wood moisture meters 18002
Published online: 23 September 2019
Open Access
Humidity Calibration Automation 18003
Published online: 23 September 2019
Open Access
New calibration facility developped at LNE-CETIAT 18004
Published online: 23 September 2019
Open Access
Quantifying the effect of thermal heat radiation emitted by the walls of a climatic chamber on temperature measurements 18005
Published online: 23 September 2019
Open Access
A new EMPIR Project “MetForTC” for Developing Traceable Measurement Capabilities for Monitoring Thermocouple Performance 18006
Published online: 23 September 2019
Open Access
Influence of low temperature annealing on Nickel RTDs designed for heat flux sensing 18007
Published online: 23 September 2019
Biology - Health / Biologie-Santé
Open Access
Optical Phantom Development for Skin Measurement 19001
Published online: 23 September 2019
Open Access
The Contribution of the Metrological Management in the Moroccan Establishments of Blood Donation (Experiment of the regional center of blood transfusion in Oujda Morocco) 19002
Published online: 23 September 2019
Open Access
Comparison of temperature dynamics of various thermal cycler calibration methods 19003
Published online: 23 September 2019
Open Access
Comprendre et surveiller la portée d’accréditation grâce à l’ISO 9001 19004
Published online: 23 September 2019
Open Access
Development of a new “6-axis” force connected sensor. 19005
Published online: 23 September 2019
Chemistry / Chimie
Open Access
Evaluation of Homogeneity in Certified Reference Materials (CRM) 20001
Published online: 23 September 2019
Open Access
Preparation of hydrogen chloride in hydrogen standard gas mixtures for hydrogen purity requirements 20002
Published online: 23 September 2019
Open Access
Influence of storage time of pulp and paper industry wastewaters in AOX determination 20003
Published online: 23 September 2019
Open Access
Recent progress in chemical measuring capabilities in INM as a result of EMRP/EMPIR Programme 20004
Published online: 23 September 2019
Flow / Débit
Open Access
Installation for the high accuracy flow meter calibration with the weighting method 21001
Published online: 23 September 2019
Open Access
The influence of Gas Type on a Thermal Mass Flowmeter Calibration Results 21002
Published online: 23 September 2019
IOT and Calibration Challenges / IOT : défis pour l’étalonnage
Open Access
Wireless calibration for Industry 4.0 22001
Published online: 23 September 2019
Open Access
Sensors with Digital Output – A Metrological Challenge 22002
Published online: 23 September 2019
Open Access
Methods for dynamic calibration and augmentation of digital acceleration MEMS sensors. 22003
Published online: 23 September 2019
Nanometrology / Nanometrologie
Open Access
Asymmetric field flow fractionation applied to the nanoparticles characterization: Study of the parameters governing the retention in the channel 23001
Published online: 23 September 2019
Standards in Thermal Measurements / Références en Thermique
Open Access
Response time measurement of hygrometers at LNE-CETIAT 24001
Published online: 23 September 2019
Open Access
Improving fixed-point cell realization by modifying furnace heater shape 24002
Published online: 23 September 2019
Photonics / Photonique
Open Access
New optical power sensors using pyrolytic graphite 25001
Published online: 23 September 2019
Industry 4.0 / Industrie 4.0
Open Access
Autonomous vehicles for remote sensing use – Opportunities and challenges for Drone 26001
Published online: 23 September 2019
Open Access
Semantic Web Technologies for Data Curation and Provenance 26002
Published online: 23 September 2019
Open Access
Determination of the coefficient of expansion of a carbon tube and its assembly for thermal compensation of metrological structures 26003
Published online: 23 September 2019
Open Access
Improving reliability of power plant equipment due to measurement information redundancy 26004
Published online: 23 September 2019
Open Access
Achieving precision measurements under non-standard environmental conditions 26005
Published online: 23 September 2019
Open Access
How do we ensure the robustness of the links between specification and evaluation in data measurement analysis and treatment ? 26006
Published online: 23 September 2019
Open Access
The role of magnetic sensors in the hybridisation and electrification of vehicles 26007
Published online: 23 September 2019
Mechanics Quantities / Grandeurs Mécaniques
Open Access
Precision of the Residual Stress determined by X-ray Diffraction: Summery and Limits 27001
Published online: 23 September 2019
Open Access
News on the Calibration of Non-Automatic Weighing Instruments 27002
Published online: 23 September 2019
Open Access
Comparison on seismometer sensitivity following ISO 16063-11 standard 27003
Published online: 23 September 2019
Open Access
Novel method for the realization of small differential pressures between 1 Pa and 1 kPa 27004
Published online: 23 September 2019
Open Access
Research on an alternative LS2P microphone based on a new reciprocity calibration system 27005
Published online: 23 September 2019
Open Access
Development of a Primary Dynamic Calibration Method for Pressure Sensors 27006
Published online: 23 September 2019
Open Access
Improvement of INRiM static expansion system as vacuum primary standard between 10-4 Pa and 1000 Pa. 27007
Published online: 23 September 2019
Open Access
New strain gauge-based torque reference chain offering smallest measurement uncertainties 27008
Published online: 23 September 2019
Open Access
Improvement of dynamic pressure standard for calibration of dynamic pressure transducers 27009
Published online: 23 September 2019
Training / Formation
Open Access
Problems of metrological assurance of gas analysis using IR spectroscopy 28001
Published online: 23 September 2019
Open Access
Hands-on activity demonstrating different in-process measurement methods 28002
Published online: 23 September 2019
Radiation
Open Access
Influences of sensor protective coating on laser energy calibration results 29001
Published online: 23 September 2019