201919th International Congress of Metrology
|Number of page(s)||3|
|Section||Biology - Health / Biologie-Santé|
|Published online||23 September 2019|
The Contribution of the Metrological Management in the Moroccan Establishments of Blood Donation (Experiment of the regional center of blood transfusion in Oujda Morocco)
Faculty of Science Mohammed First 60000 Oujda Morocco
2 Regional Center of Blood Transfusion in Oujda Hospital al Farabi 60000 Oujda Morocco
a Corresponding author: firstname.lastname@example.org
Metrological verification consists of proving by calibration measurements that specified requirements are met. The result of an audit is a compliance decision followed by re-commissioning or non-compliance followed by an adjustment, repair, decommissioning, or device reform. At the regional blood transfusion center of Oujda, from 2010 to 2018 the number of metrological qualification has increased from 88 to 152 acts with compliance going from 92% to 97%, thus the number of visit for preventive and curative maintenance of the share of external companies has also increased since 2010 to 2018 from 10 annual visits to 43 annual visits, which indicates a strong progressive metrological activity and an important place of the metrological process in the continuity of guaranteeing a safety of the result obtained from the operations carried out for the practitioners and for donor and recipient patients of the blood product. An action plan was implemented to correct the anomalies identified such as the acquisition of new metrology equipment, to predict the change of climatic chambers and non-adapted devices, the acquisition of more sophisticated machines and the establishment of a continuous recording system of the cold chain.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.