201919th International Congress of Metrology
|Number of page(s)||4|
|Section||Science with Impact|
|Published online||23 September 2019|
New EMPIR project – Metrology for Drug Delivery
Instituto Português da Qualidade, I.P., Portugal
2 METAS, Switzerland
3 NEL, UK
4 DTI, Denmark
5 UMCU, A.M.D.E., Netherlands
6 LNE-CETIAT, France
* E-mail: firstname.lastname@example.org
This document presents the scientific and technical objectives, state of the art and expected progress beyond it, and most importantly the expected impact on metrology, science, standards, and society of the new joint research project MeDD II, Metrology for drug delivery (follow up of project MeDD I). It was selected for funding through the EURAMET EMPIR program of the European Commission and the participating countries. The project starts in June 2019 and will last for three years. It involves 15 partners from National and Designated Metrology Institutes, companies, and academia. The main objective is to enable traceable measurements of volume, flow and pressure of existing drug delivery devices (for example infusion pumps and analysers) and inline sensors that work at flow rates lower than 100 nL/min, in order to prevent inaccurate measurement results. This project will also investigate fast changing flow rates, liquid mixing behaviour and occlusion phenomena in multi-infusion systems with the purpose of improving dosing accuracy in each infusion line.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.