201919th International Congress of Metrology
|Number of page(s)||8|
|Section||Traceability - Quality / Traçabilité - Qualité|
|Published online||23 September 2019|
Inter-laboratory comparison on the calibration of measurements photometric and radiometric sensors
Department of Laboratories and Calibration Management, Roketsan Rocket Industry and Trade Inc., 06780 Ankara, Turkey
* Corresponding Author : firstname.lastname@example.org
The competences of the test and calibration laboratories are provided by two complementary methods. The first of these methods is the on-site audit carried out by the administrative and technical committee established by TURKAK (Turkish Accreditation Institution) according to the requirements of TS EN ISO / IEC 17025 . The other technique is interlaboratory comparison and proficiency testing to evaluate laboratory performance and ensure the quality of results. Investing in the right equipment, training personnel, defining methods, documenting, calculating uncertainty, even performing internal verifications do not guarantee reliability or accuracy. It cannot answer the question of whether we can produce the same results as the same testers in the world. It is necessary to prove that the laboratory can actually produce accurate results externally by going through comparison tests with other national/international laboratories.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.