201919th International Congress of Metrology
|Number of page(s)||5|
|Section||Electricity / Electricité|
|Published online||23 September 2019|
New reference systems for the calibration of HV impulses at LNE
LNE, Laboratoire National de métrologie et D’Essais, 29 Av Roger Hennequin 78197 Trappes, France.
* Corresponding author: email@example.com
Driven by the need for traceable measurement methods, LNE has developed and characterized new reference measurement systems for the calibration of HV impulses, including lightning impulses (1, 2 µs/ 50 µs) and switching impulses (250 µs/ 2500 µs), according to new requirements of IEC 60060-1 and IEC 60060-2. This paper describes new reference measurement systems, which have been developed and fully characterized at LNE. In addition, the paper describes the test procedure for accurate measurements especially for in-situ calibrations in 5 successive steps; measurements of radiofrequency disturbances, step response of voltage dividers, measurement of the scale factors of voltage dividers, calibration of digitizer’s channels and ranges, measurement of the voltage linearity of the divider under calibration up to maximum voltage.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.