Issue |
2019
19th International Congress of Metrology
|
|
---|---|---|
Article Number | 26004 | |
Number of page(s) | 6 | |
Section | Industry 4.0 / Industrie 4.0 | |
DOI | https://doi.org/10.1051/metrology/201926004 | |
Published online | 23 September 2019 |
Improving reliability of power plant equipment due to measurement information redundancy
1
D.I.Mendeleyev Institute for Metrology, 190005 St.Petersburg, 19 Moskovsky pr., Russia
2
St. Petersburg State University of Aerospace Instrumentation, 190000 St. Petersburg, 67 Bolshaya Morskaya str., Russia
* Corresponding author: author@email.org
Significant features of using the equipment installed at nuclear, hydraulic and thermal power plants are a multiyear cycle of continuous operation with minimum maintenance works and very high costs necessary to eliminate the consequences of possible crashes. Automatic checking of the state of the most important equipment units can become the optimal decision. In Russia, methods of building intelligent sensors and methods of intellectualization of multichannel measuring systems have been developed. Intellectualization of a measuring system enables to increase the reliability of equipment operation significantly. Examples are given.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.