Open Access
| Numéro |
2019
19th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 27008 | |
| Nombre de pages | 6 | |
| Section | Mechanics Quantities / Grandeurs Mécaniques | |
| DOI | https://doi.org/10.1051/metrology/201927008 | |
| Publié en ligne | 23 septembre 2019 | |
- Schäfer, A. “TN torque transfer standard with improved usability for inter-laboratory comparations”, Proceedings of IMEKO XXII World Congress, September 2018, Belfast NI, UK [Google Scholar]
- Röske, D., Key comparisons in the field of torque measurement, 19th IMEKO TC3 on Force, Mass and Torque: “Theory and Application in Laboratories and Industries”, 2005, Cairo, Egypt. [Google Scholar]
- Brüge, A. Simplified measurements of the humidity coefficient of torque transducers in calibration laboratories, ACTA IMEKO June 2014, Volume 3, Number 2, 32–38, www.imeko.org [Google Scholar]
- Schäck, M, “Improving the Characteristics of a High-Precision Measuring Amplifier by a Powerful Digital Signal Processing”, Proceedings of IMEKO XXII World Congress, September 2018, Belfast NI, UK [Google Scholar]
- Ring, K. Klimasicherheit von elektronischen Baugruppen (engl. transl.: Climate safety of electronic assemblies), ZVE Fraunhofer Institut für Zuverlässigkeit & Mikrointegration, Berlin, 2007 [Google Scholar]
- Käs, G. Qualität und Zuverlässigkeit elektronischer Bauelemente und Systeme, R. Oldenburg publishing, Vienna, 1983, ISBN-3-486-2735-5 [Google Scholar]
- Khaled, K.M.; Röske, D. at al. Humidity and temperature effects on torque transducers, bridge calibration unit and amplifiers, Measurement 74 (2015) p. 31–42, Elsevier B.V. Publishing house, N.Y.; U.S.A. [Google Scholar]
- Drung, D. at al. Improvements in the field of traceable high-accuracy measurement and generation of small electrical currents, Presentation of Helmholtz award winners, PTB WG 2.61, Bad Honnef, Germany, May 2018 [Google Scholar]
- Röske, D. Final report on the torque key comparison CCM.T-K1: Measurand torque: 100 Nm, 500 Nm, 1000 Nm, Metrologia, 46 (2009), Tech. Suppl., 07006. [Google Scholar]
- Schäfer, A. The Ultra-Precision Instrument DMP41 –First Experiences & Appropriate Filter settings, TC3 Conference, 2014, Cape Town, South Africa [Google Scholar]
- Schäfer, A. DMP41–A new Chapter of Ultra-Precision Instrument for Strain Gauge Transducers XX IMEKO World Congr. 2012, Busan, Rep. of Korea [Google Scholar]
- Schäfer, A. Answers to the need of higher orders of magnitude for pressure, force & torque measurement IEEE I2MTC Conference Graz, Austria, March 2012 [Google Scholar]
- Hohmann, P.: Schäfer, A., Combined Calibration of Torque and Force in a 3in1 Calibration unit, “APMF 2000”, Asia-Pacific Symposium on Measurement of Mass, Force & Torque, pp. 204, Tsukuba, Japan, 2000 [Google Scholar]
- Hoffmann, K.; An Introduction to Measurements using Strain Gauges, Hottinger Baldwin Messtechnik GmbH, Germany, 1989, pp. 145 [Google Scholar]
- Brüge, A., Fast Torque Calibrations Using Continuous Procedures, 18th Conference on Force, Mass and Torque, 24-26, 2002, Celle, Germany [Google Scholar]
- Sanponpute, T.; Arksonnarong, N. Temperature & humidity dependence on stability of torque device IMEKO TC3, TC5, TC22 Conf., 2014, Cape Town, South Africa [Google Scholar]
- Khaled, K.M.; Röske, D. at al. The influence of temperature and humidity on the sensitivity of torque transducers, Measurement 94 (2016) p. 186–200, Elsevier B.V. Publishing house, N.Y.; U.S.A. [CrossRef] [Google Scholar]