Open Access
19th International Congress of Metrology
Numéro d'article 14002
Nombre de pages 8
Section SI, what’s next? / SI, et maintenant ?
Publié en ligne 23 septembre 2019
  • BIPM. The International System of Units (SI) -9th Ed. (2019). [Google Scholar]
  • OIML. International recommendation R 111-1. Weights of classes E1, E2, F1, F2, M1, M1−2, M2, M2−3 and M3 Part 1: Metrological and technical requirements. (2004). [Google Scholar]
  • Kibble, B. P. A Measurement of the Gyromagnetic Ratio of the Proton by the Strong Field Method. in Atomic Masses and Fundamental Constants (eds. Sanders, J. H. & Wapstra, A. H.) 541–551 (Springer, 1976). [Google Scholar]
  • Robinson, I. A. & Schlamminger, S. The watt or Kibble balance: A technique for implementing the new SI definition of the unit of mass. Metrologia 53, A46–A74 (2016). [Google Scholar]
  • Kibble, B. P. & Robinson, I. A. Principles of a new generation of simplified and accurate watt balances. Metrologia 51, S132–S139 (2014). [Google Scholar]
  • Robinson, I. A. Simplified fundamental force and mass measurements. Metrologia 53, 1054–1060 (2016). [Google Scholar]
  • Kota, S. Compliant systems using monolithic mechanisms. Smart Mater. Bull. 2001, 7–10 (2001). [CrossRef] [Google Scholar]
  • Cumpson, P. J., Hedley, J. & Clifford, C. A. Microelectromechanical device for lateral force calibration in the atomic force microscope: Lateral electrical nanobalance. J. Vac. Sci. Technol. B Microelectron. Nanom. Struct. 23, 1992 (2005). [CrossRef] [Google Scholar]
  • Cullinan, M. A., Panas, R. M. & Culpepper, M. L. A multi-axis MEMS sensor with integrated carbon nanotube-based piezoresistors for nanonewton level force metrology. Nanotechnology 23, (2012). [Google Scholar]
  • Mackay, A. B., Smith, D. G., Magleby, S. P., Jensen, B. D. & Howell, L. L. Metrics for Evaluation and Design of Large-Displacement Linear-Motion Compliant Mechanisms. J. Mech. Des. 134, 011008 (2012). [CrossRef] [Google Scholar]
  • Felder, J., Lee, E., Devoe, D. L. & Member, S. Zipper Microstage Actuators. J. microelectromechanical Syst. 24, 896–903 (2015). [CrossRef] [Google Scholar]
  • Pisani, M. et al. Comparison of the performance of the next generation of optical interferometers. Metrologia 49, 455–467 (2012). [Google Scholar]
  • Smith, S. T. Flexures: Elements of Elastic Mechanisms. (CRC Press, 2000). [Google Scholar]
  • Crossley, D., Hinderer, J. & Riccardi, U. The measurement of surface gravity. Reports Prog. Phys. 76, (2013). [Google Scholar]
  • Working Group 1 of the Joint Committee for Guides in Metrology. JCGM 100:2008 -Evaluation of measurement data — Guide to the expression of uncertainty in measurement. International Organization for Standardization Geneva ISBN (2008). doi:10.1373/clinchem.2003.030528 [Google Scholar]