Open Access
17th International Congress of Metrology
Article Number 13005
Number of page(s) 6
Section Tendance en métrologie 3D / Trends in coordinate measurement
Published online 21 September 2015
  • N. Catalán Lasheras H. Mainaud-Durand, M. Modena, Measuring and aligning accelerator components to the nanometer scale (2014) [Google Scholar]
  • Zachary Wolf, LCLS-TN-05–11, A Vibrating Wire System For Quadrupole Fiducialization, SLAC, May 6, (2005) [Google Scholar]
  • Magnet Fiducialization With Coordinate Measuring Machines, H. Friedsam, W. Oren, M. Pietryka, Stanford Linear Accelerator Center, Stanford University, Stanford, CA. [Google Scholar]
  • M. Esposito, K. Artoos, P. Fernandez Carmona, S. Janssens, R. Leuxe, C. Collette, Development of advanced mechanical systems for stabilization and nano-positioning of CLIC main beam quadrupoles [Google Scholar]
  • W. Farabolini, F. Peauger, R. Corsini, D. Gamba, A. Grudiev, M.A. Khan, S. Mazzoni, J. Luis, N. Quirante, R. Pan, J.R. Towler, N. Vitoratou, K. Yaqub, C. Borgmann, J. Oegren, R. Ruber, recent results from CTF3 two beam test stand, Proc. of IPAC2014 [Google Scholar]
  • R. L. Lillestøl, E. Adli, J. Pfingstner, W. Farabolini, R. Corsini, S. Döbert, A. Grudiev, L. Malina, W. Wuench, wakefield monitor experiments with x-band accelerating structures [Google Scholar]
  • P. Arpaia, M. Buzio, O. Koster, S. Russenschuck, G. Severino, Calibrating the sensing-coil radius by feed-down from a harmonic reference, University of Sannio, Benevento, Italy, CERN, Switzerland. [Google Scholar]
  • J. DiMarco, G. Chlachidze, A. Makulski, D. Orris, M. Tartaglia, J. C. Tompkins, G.V. Velev and X. Wang, Application of PCB and FDM Technologies to Magnetic Measurement Probe System Development, IEEE Tr. on Ap. Supercond., 23, 3, (2013). [CrossRef] [Google Scholar]
  • H. Braun, M. Buzi1, R. Deckardt, O. Dunkel, R. Felder, L. Fiscarelli, R. Ganter, S. Kasaei, F. Löhl, S. Sanfilippo, G. Severino, V. Vrankovic and L. Walckiers, Small-diameter rotating coils for field quality measurements in quadrupole magnets. [Google Scholar]
  • A. B. Temnykh. “Vibrating wire field-measuring technique”. In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 399.2 (June 1997), pp. 185–194. [CrossRef] [Google Scholar]
  • Z. Wolf and M. Y. Levashov. Set up and test results for a vibrating wire system for quadrupole fiducialization. Tech. rep. LCLS-TN-06–14. SLAC National Accelerator Laboratory, Menlo Park, California, USA, 2005. [Google Scholar]
  • P. Arpaia, C. Petrone, S. Russenschuck, and L. Walckiers. “Vibrating-wire measurement method for centering and alignment of solenoids”. In: Journal of Instrumentation 8. P11006 (Nov. 2013). [Google Scholar]
  • M. Duquenne, M. Anastasopoulos, D. Caiazza, G. Deferne, H. Mainaud-Durand, J. Garcia, M. Modena, V. Rude, J. Sandomierski, M. Sosin, Determination of the magnetic axis of a clic drive beam quadrupole with respect to external alignment targets using a combination of wps, CMM and laser tracker measurements, Proceedings of IPAC2014, Dresden, 2014. [Google Scholar]
  • S.W. Kamugasa, V. Vlachakis, PACMAN study of FSI and micro-triangulation for the pre-alignment of CLIC [Google Scholar]