Open Access
| Issue |
2015
17th International Congress of Metrology
|
|
|---|---|---|
| Article Number | 13006 | |
| Number of page(s) | 6 | |
| Section | Tendance en métrologie 3D / Trends in coordinate measurement | |
| DOI | https://doi.org/10.1051/metrology/20150013006 | |
| Published online | 21 September 2015 | |
- A. Jaramillo, P. Boulanger, F. Prieto, On-line 3-D system for the inspection of deformable parts, The International Journal of Advanced Manufacturing Technology 57 9–12 1053–1063 (2011). [CrossRef] [Google Scholar]
- A. Jaramillo, P. Boulanger, F. Prieto, Fast dimensional inspection of deformable parts from partial views, Computers in Industry, In Press, 2013. [Google Scholar]
- A. Jaramillo, P. Boulanger, F. Prieto, Deformable part inspection using a spring–mass system, Computer-Aided Design 45 1128–1137 (2013). [CrossRef] [Google Scholar]
- E. Savio, L. De Chiffre, R. Schmitt, Metrology of freeform shaped parts, Annals of the CIRP 56(2) 810–835 (2007). [Google Scholar]
- V. Wolff, D-T. Tran, S. Raynaud, Using virtual parts to optimize the metrology process Tehnomus 19 9–15 (2012). [Google Scholar]
- H. Radvar-Esfahlan, S.-A. Tahan, Nonrigid geometric metrology using generalized numerical inspection fixtures, Precision Engineering 36 (1) 1–9 (2012). [CrossRef] [Google Scholar]
- D-T. Tran, Optimisation du processus du contrôle métrologie des pièces mécaniques dans le cadre d’une analyse 3D du tolérancement, Thèse de Doctorat de l’INSA de Lyon, 2014. [Google Scholar]