Open Access
| Numéro |
2019
19th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 09001 | |
| Nombre de pages | 14 | |
| Section | Dimensional / Dimensionnel | |
| DOI | https://doi.org/10.1051/metrology/201909001 | |
| Publié en ligne | 23 septembre 2019 | |
- G.H. Majzoobi, G.H. Farrahi, and N. Habibi, Experimental evaluation of the effect of thread pitch on fatigue life of bolts, International journal of fatigue 27, 2, 189-196, (2005) [Google Scholar]
- American Society of Mechanical Engineering, ANSI/ASME B1.2-1983, Gage and Gaging for Unified Inch Screw Threads, (1983) [Google Scholar]
- Guide, EURAMET Calibration, Determination of pitch diameter of parallel thread gauges by mechanical probing, EURAMET/cg-10 1 (2007) [Google Scholar]
- S. Carmignato, L.D. Chiffre, A new method for thread calibration on coordinate measuring machines, CIRP Annals 52, 1, 447-450, (2003) [CrossRef] [Google Scholar]
- T.P. Merkac, B. Acko, Comparising measuring methods of pitch diameter of thread gauges and analysis of influences on the measurement results, Measurement 43, 3, 421-425, (2010) [CrossRef] [Google Scholar]
- American Society of Mechanical Engineering, ANSI/ASME B1.16-1984, Metric Thread Gages and Gaging for Metric Threads, (1984) [Google Scholar]
- SIP Guide, Measurement of The Effective Diameter of Screw Threads By Means of Calibrated Wires, Societe Genevoise D’Instruments De Physique, (1988) [Google Scholar]
- International Organization for Standardization, ISO/IEC 13528 :2015, Statistical methods for use in proficiency testing by interlaboratory comparison, (2015) [Google Scholar]