Open Access
| Numéro |
2013
16th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 06011 | |
| Nombre de pages | 5 | |
| Section | Les avancées en mesure 3D et Dimensionnel / Advanced coordinate metrology & Dimensional | |
| DOI | https://doi.org/10.1051/metrology/201306011 | |
| Publié en ligne | 7 octobre 2013 | |
- National regulation nº 19/2007, 5th of January [Google Scholar]
- OIML R117-1 – “Dynamic measuring systems for liquids other than water, (2007) [Google Scholar]
- N. Almeida, E. Batista, E. Filipe, “Evaluation of the influence of the liquid used in the verification of fuel dispensers and their standard calibration”, OIML Bulletin L, 4, (2009) [Google Scholar]
- ISO/IEC 17043:2010 – Conformity assessment — General requirements for proficiency testing [Google Scholar]
- ISO 13528:2005 – Statistical methods used in proficiency testing by interlaboratory comparisons [Google Scholar]
- ISO 4787:2010 – Laboratory glassware - Volumetric glassware - Methods for use and testing of capacity [Google Scholar]
- DIRECTIVE 2004/22/EC of the European Parliament and of the Council, of 31 March 2004, on measuring instruments [Google Scholar]
- ”Evaluation of measurement data – Guide to the expression of uncertainty in measurement” JCGM 100:2008 (GUM 1995 with minor corrections) [Google Scholar]