Open Access
| Numéro |
2013
16th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 03001 | |
| Nombre de pages | 7 | |
| Section | Force et Pression et Grandeurs mécaniques / Force and Pressure & Mechanical quantities | |
| DOI | https://doi.org/10.1051/metrology/201303001 | |
| Publié en ligne | 7 octobre 2013 | |
- J.C. Legras, A. Huot , P. Delajoud, “La référence nationale de pression du BNM dans le domaine de 5 à 200 MPa”, Bull. d’Information du BNM, (avril 1982), 48, pp. 9–33. [Google Scholar]
- S.L. Dadson, S.L. Lewis, G.N. Peggs, “The Pressure Balance – Theory and Practice”, Her Majesty’s Stationnary Office, NPL, (1982) [Google Scholar]
- G.F. Molinar et al., “CCM key comparison in the pressure range 0.05 MPa to 1 MPa (gas medium, gauge mode). Phase A1: Dimensional measurements and calculation of effective area”, Metrologia, (1999), 36, p. 657 [CrossRef] [Google Scholar]
- J. C. Legras et al., “CCM key comparison in the pressure range 50 kPa to 1000 kPa (gas medium, gauge mode). Phase A2: Pressure measurements”, Metrologia, (1999), 36, 663 [CrossRef] [Google Scholar]
- J.C. Legras, “Etude métrologique d’une référence de pression dans le domaine de 5 à 200 MPa”, Mémoire d’ingénieur CNAM, (1978) [Google Scholar]
- W Sabuga, M Bergoglio, T Rabault, B Waller, J C Torres, D A Olson, A Agarwal, T Kobata and A K Bandyopadhyay, “Final Report on Key Comparison CCM.P-K7 in the range 10 MPa to 100 MPa of hydraulic gauge pressure”,Metrologia, 42, (2005), [Google Scholar]
- S.P. Timoshenko, “Résistance des matériaux”, Dunod, Tome 2, (1930), 213–220 [Google Scholar]
- T. Rabault et J.C. Legras, “Calculation of the pressure distortion coefficient and uncertainty budget of the BNM/LNE 200 MPa national standard”, Metrologia, 42, (2005), pp. 246–249 [CrossRef] [Google Scholar]
- W. Sabuga, G. Molinar, G. Buonanno, T. Esward, T. Rabault et L. Yagmur, “Calculation of the distortion coefficient and associated uncertainty of PTB and LNE 1 GPa pressure balances using finite element analysis— EUROMET project 463”, Metrologia, 42, (2005), pp. 202–206. [CrossRef] [Google Scholar]
- P. Vergne, “New high-pressure viscosity measurements on di(2-ethylhexyl) sebacate and comparisons with previous data”, (1990), High Temperatures - High Pressures , 22, n°6, pp. 613–621 [Google Scholar]