Open Access
16th International Congress of Metrology
Article Number 03001
Number of page(s) 7
Section Force et Pression et Grandeurs mécaniques / Force and Pressure & Mechanical quantities
Published online 07 October 2013
  • J.C. Legras, A. Huot , P. Delajoud, “La référence nationale de pression du BNM dans le domaine de 5 à 200 MPa”, Bull. d’Information du BNM, (avril 1982), 48, pp. 9–33.
  • S.L. Dadson, S.L. Lewis, G.N. Peggs, “The Pressure Balance – Theory and Practice”, Her Majesty’s Stationnary Office, NPL, (1982)
  • G.F. Molinar et al., “CCM key comparison in the pressure range 0.05 MPa to 1 MPa (gas medium, gauge mode). Phase A1: Dimensional measurements and calculation of effective area”, Metrologia, (1999), 36, p. 657 [CrossRef]
  • J. C. Legras et al., “CCM key comparison in the pressure range 50 kPa to 1000 kPa (gas medium, gauge mode). Phase A2: Pressure measurements”, Metrologia, (1999), 36, 663 [CrossRef]
  • J.C. Legras, “Etude métrologique d’une référence de pression dans le domaine de 5 à 200 MPa”, Mémoire d’ingénieur CNAM, (1978)
  • W Sabuga, M Bergoglio, T Rabault, B Waller, J C Torres, D A Olson, A Agarwal, T Kobata and A K Bandyopadhyay, “Final Report on Key Comparison CCM.P-K7 in the range 10 MPa to 100 MPa of hydraulic gauge pressure”,Metrologia, 42, (2005), [CrossRef]
  • S.P. Timoshenko, “Résistance des matériaux”, Dunod, Tome 2, (1930), 213–220
  • T. Rabault et J.C. Legras, “Calculation of the pressure distortion coefficient and uncertainty budget of the BNM/LNE 200 MPa national standard”, Metrologia, 42, (2005), pp. 246–249 [CrossRef]
  • W. Sabuga, G. Molinar, G. Buonanno, T. Esward, T. Rabault et L. Yagmur, “Calculation of the distortion coefficient and associated uncertainty of PTB and LNE 1 GPa pressure balances using finite element analysis— EUROMET project 463”, Metrologia, 42, (2005), pp. 202–206. [CrossRef]
  • P. Vergne, “New high-pressure viscosity measurements on di(2-ethylhexyl) sebacate and comparisons with previous data”, (1990), High Temperatures - High Pressures , 22, n°6, pp. 613–621

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.