Numéro |
2019
19th International Congress of Metrology
|
|
---|---|---|
Numéro d'article | 27009 | |
Nombre de pages | 7 | |
Section | Mechanics Quantities / Grandeurs Mécaniques | |
DOI | https://doi.org/10.1051/metrology/201927009 | |
Publié en ligne | 23 septembre 2019 |
Improvement of dynamic pressure standard for calibration of dynamic pressure transducers
1
TUBITAK UME, National Metrology Institute, Pressure Laboratory, Kocaeli, Turkey
2
Yildiz Technical University, Department of Marine Engineering, Istanbul, Turkey
* Corresponding author: yasin.durgut@tubitak.gov.tr
In dynamic pressure measurement phenomena, dynamic pressure calibration of the measurement chain including a pressure sensor, signal conditioning amplifier and data acquisition part is required. A drop mass dynamic calibration machine which is used for the dynamic calibration in hydraulic media was designed and developed. This study presents a research study and measurement results on the dynamic calibration of pressure transducers by using the newly developed machine.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.