201919th International Congress of Metrology
|Nombre de pages||6|
|Section||Chemical Analysis / Analyses Chimiques|
|Publié en ligne||23 septembre 2019|
Development of standardized methods for the analysis of amines, terpenes and ammonia in biomethane
GRTgaz - Research and Innovation Center for Energy (RICE), 361 avenue du Président Wilson, 93211 La Plaine Saint Denis, France
2 VSL, Thijsseweg 11, 2629JA, Delft, the Netherlands
3 National Physical Laboratory, Hampton Road, Teddington, Middlesex, UK, TW11 0LW
* Corresponding author: firstname.lastname@example.org
European Commission targets specify that 32% of the European energy consumption should come from renewable sources by 2030. One of the most promising options to reach this target is gas generation from biomass, especially biomethane, for injection into natural gas grid. EN 16723 presents specifications for VOCs, corrosive components and compressor oil in biomethane, impurities monitored because of integrity of gas infrastructure and for health and safety reasons. Currently, it proposes test methods that are neither harmonized nor validated, and usually not dedicated to biomethane. Launched in June 2017, the EMPIR project 16ENG05 Metrology for Biomethane is aimed for specific, robust and standardized analytical methods development, along with novel and improved reference standards. The present paper focusses on the developed methods for the monitoring of amines, terpenes and ammonia involving μGC-TCD, TD-GC-MS and OFCEAS.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.