201718th International Congress of Metrology
|Nombre de pages||3|
|Section||Metrology for health and better life / Métrologie, santé et confort de vie|
|Publié en ligne||18 septembre 2017|
Metrology in Thermal cyclers: a new approach
1 APoDis Technologies S.A.S, RD 2020 Locon, 41600 Chaumon-sur-Tharonne, France
2 Tumorothèque Caen Basse Normandie, 3 avenue du Général Harris 14076 Caen cedex 5
Metrological laboratories propose different protocols to qualify thermal cyclers, each depending on a different approach. But all these protocols may not match the laboratory need. Some questions must be answered before any metrological test. Has the qualification protocol be performed with a fixed temperature program? What must be done if the metrological qualification is out of specification? Can specifications be set already?
With reference to standardised publications [1-3], we are going to try to focus on the current state of art about metrological qualification. It seems to be necessary to confirm any metrological test by a biological one. And to conclude that a difference between measured value and fixed value does not necessary lead to an end-of-life your thermal cycler even a false genetic analysis.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.