| Numéro |
2017
18th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 01007 | |
| Nombre de pages | 7 | |
| Section | Metrology Custom-Made Issues / Metrologie : Des Enjeux Sur-Mesure | |
| DOI | https://doi.org/10.1051/metrology/201701007 | |
| Publié en ligne | 18 septembre 2017 | |
Smart Metrology: From the metrology of instrumentation to the metrology of decisions
1 Deltamu, 48 Rue de Sarliève, 63800 Cournon d’Auvergne
2 PSA Group, C.T. de Vélizy A, 2, route de Gisy, 78943 Vélizy-Villacoublay Cedex,
* Corresponding author: jmpou@deltamu.com
laurent.leblond1@mpsa.com
Metrology is of much greater importance to the industrial world than may at first appear. Quality certification has often reduced industrial metrology to the model used in legal metrology, a model that is inappropriate to it. At the dawn of a new era, it is important to reposition the mission given to metrology and allow it to take its rightful place at the heart of the revolution of industrial practices ahead of us. This paper summarizes the new expectations that the company metrologist is likely to face. These are developed in greater detail in the book Smart Metrology - From the metrology of instrumentation to the metrology of decisions (“ Smart Metrology: De la métrologie des instruments à la métrologie des décisions”) published by AFNOR in 2016.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.