| Numéro |
2013
16th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 12006 | |
| Nombre de pages | 2 | |
| Section | Autour de la traçabilité et Management, Formation / Achieving traceability | |
| DOI | https://doi.org/10.1051/metrology/201312006 | |
| Publié en ligne | 7 octobre 2013 | |
Centre For Intercomparisons
SP Technical Research Institute of Sweden, Box 857, SE-501 15 Borås, Sweden
a Corresponding author: info@intercomparison.org
“To measure is to know” Lord Kelvin said. But how well are you measuring and do you measure in the right way? A simple way to check the quality of your measurement is to attend in intercomparisons. Participating in an intercomparison can be a simple and powerful way to verify a measurement capability and it is the most effective way to find out how well one measures. CFI is a cooperation between the NMIs (National Metrology institutes) in Nordic countries aimed at providing intercomparisons for secondary laboratories. We intend to present our experiences when offering intercomparisons world-wide and connecting with other services in Europe. Our major areas are so far: electrical, force, length, mass, pressure, vacuum and temperature but the range will be modified due to the stakeholders demands.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.