201316th International Congress of Metrology
|Nombre de pages
|Dosimétrie et Radiothérapie et Santé / Dosimetry and Radiotherapy & Health
|Publié en ligne
|7 octobre 2013
Application of TDCR-Geant4 modeling to activity standardization
CEA, List, Laboratoire National Henri Becquerel (LNE-LNHB), F-91191 Gif-sur-Yvette CEDEX, France
a Corresponding author: email@example.com
The LNE-LNHB, in charge of the French standards for radionuclide metrology, develops primary measurement methods intended for the calibration of secondary measuring instruments, such as used in hospitals, to determine the activity of radiopharmaceuticals injected into patients. The triple-to-double coincidence ratio ( TDCR) method, based on liquid scintillation counting, is widely implemented for radio nuclides which are pure beta and electron capture emitters. This technique requires the mixing of the radioactive solution with a scintillator cocktail. When preparing samples, the existence of physicochemical processes such as chemi-luminescence can require to delay the measurements to achieve the necessary stability conditions, which is not always compatible for short half life radio nuclides. To avoid this constraint, a new approach using Cerenkov radiation as a method of light production is presented in this paper, applied to the standardization of the short-lived radiopharmaceutical 11C ( T1/2 ~ 20 min). The method is based on comprehensive modeling of the TDCR counter (the experimental equipment) using a Geant4 toolkit in order to calculate the detection efficiency.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.