| Numéro |
2013
16th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 04008 | |
| Nombre de pages | 5 | |
| Section | Outils mathématiques / Mathematical tools | |
| DOI | https://doi.org/10.1051/metrology/201304008 | |
| Publié en ligne | 7 octobre 2013 | |
Analysis of a national low dc resistance inter-laboratories comparison
National Institute of Metrological Research, (INRIM), str. delle Cacce, 91 – 10135 Turin, Italy
Corresponding author: f.galliana@inrim.it
In this paper the description of an inter-laboratories comparison between the National Institute of Metrological Research (INRIM) and nineteen Italian Secondary Calibration Electrical Laboratories, is given along with its main results in graphical way. The transportable standards were three Tinsley four terminal standard resistors to be calibrated in oil respectively at 5 A and 20 A (1 mΩ), 1 A and 5 A (10 mΩ), 0.1 A and 1 A (100 mΩ). The comparison results were satisfactory, except only in a case of a Laboratory for which these measurements were outside its accreditation fields.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.