Open Access
17th International Congress of Metrology
Article Number 18003
Number of page(s) 6
Section Posters SI
Published online 21 September 2015
  • I. A. Robinson, “Watt and joule balances,” Metrologia, vol. 51, no. 2, p. S1, Apr. 2014. [CrossRef]
  • S. Schlamminger, D. Haddad, F. Seifert, L. S. Chao, D. B. Newell, R. Liu, R. L. Steiner, and J. R. Pratt, “Determination of the Planck constant using a watt balance with a superconducting magnet system at the National Institute of Standards and Technology,” Metrologia, vol. 51, no. 2, p. S15, Apr. 2014. [CrossRef]
  • C. A. Sanchez, B. M. Wood, R. G. Green, J. O. Liard, and D. Inglis, “A determination of Planck’s constant using the NRC watt balance,” Metrologia, vol. 51, no. 2, p. S5, Apr. 2014. [CrossRef]
  • M. Thomas, P. Espel, D. Ziane, P. Pinot, P. Juncar, F. P. D. Santos, S. Merlet, F. Piquemal, and G. Genevès, “First determination of the Planck constant using the LNE watt balance,” Metrologia, vol. 52, no. 2, p. 433, Apr. 2015. [CrossRef]
  • M. Stock, “Watt balance experiments for the determination of the Planck constant and the redefinition of the kilogram,” Metrologia, vol. 50, no. 1, pp. R1–R16, Feb. 2013. [CrossRef]
  • Y. Azuma, P. Barat, G. Bartl, H. Bettin, M. Borys, I. Busch, L. Cibik, G. D’Agostino, K. Fujii, H. Fujimoto, A. Hioki, M. Krumrey, U. Kuetgens, N. Kuramoto, G. Mana, E. Massa, R. Meeß, S. Mizushima, T. Narukawa, A. Nicolaus, A. Pramann, S. A. Rabb, O. Rienitz, C. Sasso, M. Stock, R. D. V. Jr, A. Waseda, S. Wundrack, and S. Zakel, “Improved measurement results for the Avogadro constant using a 28Si-enriched crystal,” Metrologia, vol. 52, no. 2, p. 360, Apr. 2015. [CrossRef]
  • P. Becker, H. Friedrich, K. Fujii, W. Giardini, G. Mana, A. Picard, H.-J. Pohl, H. Riemann, and S. Valkiers, “The Avogadro constant determination via enriched silicon-28,” Meas. Sci. Technol., vol. 20, no. 9, p. 092002, Sep. 2009. [CrossRef]
  • “Resolution 1 of the 25th Meeting of the CGPM 2014 On the future revision of the International System of Units, the SI (”
  • “NewKILO Website (”
  • S. Davidson, J. Berry, Z. Silvestri, R. Hogstrom, and R. Green, “Addressing the requirements for the practical implementation and ongoing maintenance of the redefined kilogram,” in Joint IMEKO International TC3, TC5 and TC22 Conference 2014, 2014.
  • S. Davidson, “A review of surface contamination and the stability of standard masses,” Metrologia, vol. 40, no. 6, p. 324, Dec. 2003. [CrossRef]
  • Z. Silvestri, R. S. Davis, G. Genevès, A. Gosset, T. Madec, P. Pinot, and P. Richard, “Volume magnetic susceptibility of gold–platinum alloys: possible materials to make mass standards for the watt balance experiment,” Metrologia, vol. 40, no. 4, p. 172, 2003. [CrossRef]
  • P.-A. Meury and R. Molins, “Definition of a new metallic alloy for the realisation of secondary reference mass standards,” MAPAN-J. Metrol. Soc. India, vol. 23, no. 3, pp. 165–172, 2008.
  • C. Zerrouki, F. Miserey, and P. Pinot, “Répartition angulaire de la lumière diffusée par un échantillon poli du super-alliage CoCrWNi (Alacrite XSH) ; appplication à la détermination des paramètres statistiques caractérisant la rugosité superficielle,” Eur Phys AP, vol. 1, pp. 253–259, 1998. [CrossRef] [EDP Sciences]
  • S. Azouigui, Z. Silvestri, C. Zerrouki, S. Bouhtiyya, M. D. Plimmer, D. Spaltmann, A. Kovalev, M. Woydt, and P. Pinot, “Angle resolved scattering as a tribological investigation tool for surface characterization,” Wear, vol. 326–327, pp. 58–67, Mar. 2015. [CrossRef]
  • G. Girard, “International report: the third periodic verification of national prototypes of the kilogram (1988–1992),” Metrologia, vol. 31, no. 4, pp. 317–336, 1994. [CrossRef]
  • G. Girard, The washing and cleaning of kilogram prototypes at the BIPM. 1990.
  • J. Berry, S. Davidson, P. Barat, and R. Davis, “Comparison of UV/ozone cleaning of platinum/iridium kilogram mass standards with nettoyage-lavage cleaning,” Metrologia, vol. 48, no. 3, pp. 181–186, Jun. 2011. [CrossRef]
  • P. Fuchs, K. Marti, G. Grgić, and S. Russi, “UV/ozone cleaning of mass standards: results on the correlation between mass and surface chemical state,” Metrologia, vol. 51, no. 5, pp. 387–393, Oct. 2014. [CrossRef]
  • P. Fuchs, K. Marti, and S. Russi, “Removal of mercury contamination on primary mass standards by hydrogen plasma and thermal desorption,” Metrologia, vol. 50, no. 1, pp. 73–82, Feb. 2013. [CrossRef]
  • P. Fuchs, K. Marti, and S. Russi, “Materials for mass standards: long-term stability of PtIr and Au after hydrogen and oxygen low-pressure plasma cleaning,” Metrologia, vol. 49, no. 6, pp. 615–627, Dec. 2012. [CrossRef]
  • K. Marti, P. Fuchs, and S. Russi, “Cleaning of mass standards: II. A comparison of new techniques applied to actual and potential new materials for mass standards,” Metrologia, vol. 50, no. 1, pp. 83–92, Feb. 2013. [CrossRef]
  • Z. Silvestri, S. Azouigui, S. Bouhtiyya, S. Macé, M. D. Plimmer, P. Pinot, F. Tayeb-Chandoul, and R. Hannachi, “Thermal desorption mass spectrometer for mass metrology,” Rev. Sci. Instrum., vol. 85, no. 4, p. 045111, Apr. 2014. [CrossRef]
  • K. Marti, P. Fuchs, and S. Russi, “Traceability of mass II: a study of procedures and materials,” Metrologia, vol. 52, no. 1, pp. 89–103, Feb. 2015. [CrossRef]