Open Access
Issue
2015
17th International Congress of Metrology
Article Number 13010
Number of page(s) 4
Section Tendance en métrologie 3D / Trends in coordinate measurement
DOI https://doi.org/10.1051/metrology/20150013010
Published online 21 September 2015
  • A. Conci, E. Azevedo. F. R. Leta. “Computação Gráfica: Teoria e Prática.” Volume 2. Rio de Janeiro: Elsevier, 2008. 405p. [Google Scholar]
  • G. M. Vieira, F. R. Leta, P B. Costa, S. L. Braga, D. Gobin. “Computer Vision Analysis of a Melting Interface Problem with Natural Convection.” 4th International Conference on Advanced Computational Engineering and Experimenting, ACE-X, Paris, França, 2010. [Google Scholar]
  • P. B. Costa, A. Marques, F. O. Baldner, F. R. Leta. “Line scale measurement using image registration.” International Journal of Metrology and Quality Engineering, vol.04, PP 121–125, 2013. [CrossRef] [EDP Sciences] [Google Scholar]
  • J.S. Beers, W. B. Penzes. “The NIST Scale Interferometer.” Journal of Research of the National Institute of Standards and Technology, vol. 104, 1999. [CrossRef] [Google Scholar]
  • G. Rodger. “Measurement Good Practice Guide: Dimensional Measurement Using Vision Systems.” National Physical Laboratory, Middlesex, UK, 2001. [Google Scholar]
  • P. B. Costa, W. S. Barros, R. S. Oliveira, M. S. Dutra. “Development of a software for the line scales calibration system in INMETRO.” The 19th Congress of Mechanical Engineering, Brasília, 2007. [Google Scholar]
  • A. Lassila, E. Ikonen, K. Riski. “Interferometer for Calibration of Graduated Line Scales with a Moving Ccd Câmera as a Line Detector.” Applied Optics, 33, p 3600–3603, 1994. [CrossRef] [PubMed] [Google Scholar]
  • P. B. Costa, W. S. Barros. “Calibração de Escalas Graduadas no Inmetro” 1º Congresso Internacional de Metrologia Mecânica, I CIMMEC, Rio de Janeiro, Brasil, 2008. [Google Scholar]
  • Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Coordenação Geral de Acreditação. Orientação Sobre Validação de Métodos Analíticos, DOQ-CGCRE 008, 2011. [Google Scholar]