Open Access
Issue
2015
17th International Congress of Metrology
Article Number 08001
Number of page(s) 6
Section Au cœur du mix énergétique / At the heart of the energy mix
DOI https://doi.org/10.1051/metrology/20150008001
Published online 21 September 2015
  • G. Machin, K. Anhalt, M. Battuello, F. Bourson, P. Dekker, A. Diril, F. Edler, C.J. Elliott, F. Girard, A. Greenen, L. Kňazovická, D. Lowe, P. Pavlásek, J. V. Pearce, M. Sadli, R. Strnad, M. Seifert, E.M. Vuelban, The European project on high temperature measurement solutions in industry (HiTeMS) – a summary of achievements, Measurement 2015 (in press)
  • H. Preston-Thomas, The International Temperature Scale of 1990 (ITS-90), Metrologia 27 (1990) 3–10; [CrossRef]
  • erratum: Metrologia 27 (1990) 107 [CrossRef]
  • FWC Sector Competitiveness Studies –Competitiveness of the EU Aerospace Industry with focus on Aeronautics Industry, ENTR/06/054 (ECORYS study for European Commission)
  • Strategic Research Agenda, Volume 1, Advisory Council for Aeronautics in Europe, October 2004
  • Aerospace Materials, Edited by B. Cantor, P. Grant, H. Assender, Taylor & Francis 2001. ISBN 9780750307420
  • 2008 Addendum to the Strategic Research Agenda, Advisory Council for Aeronautics in Europe
  • Factories of the future: European Commission multiannual roadmap for the contractual PPP under Horizon 2020, Policy Research document prepared by EFFRA; ISBN 978-9279-31238-0
  • Aerospace Material Specification (AMS) 2750 REV. E – Pyrometry
  • Thermocouple Temperature Measurement, P.A. Kinzie, John Wiley & Sons, 1973. ISBN 0-471-48080-0
  • ASTM E1751/E1751M - 09 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
  • G. Machin, Twelve years of high temperature fixed point research: a review, AIP Conf. Proc. 1552, 305 (2013); DOI 10.1063/1.4821383
  • O. Ongrai, J.V. Pearce, G. Machin, S.J. Sweeney, Self-calibration of a W/Re thermocouple using a miniature Ru-C (1954 °C) eutectic cell, 9th International Temperature! Symposium, AIP Conf. Proc. 1552, 504 (2013)
  • J.V. Pearce, C.J. Elliott, G. Machin, O. Ongrai, Selfvalidating Type C thermocouples to 2300 °C using high temperature fixed points, 9th International Temperature Symposium, AIP Conf. Proc. 1552, 595 (2013)
  • C. Elliott, J. Pearce, G. Machin, C. Schwarz, R. Lindner, Self-validating thermocouples for assured temperature measurement confidence and extended useful life, Proc. 12th European Conference on Spacecraft structures, materials and environmental testing, ESA Communications med. I Ouwehand, 2012 ESA, ISBN 978-92-9092-255-1 (2012)
  • EUROMET Project No. 635 Final Report: Comparison of the reference surface temperature apparatus at NMIs by comparison of transfer surface temperature standards, E. Andras, November 2003
  • R. Morice, E. Andras, E. Devin, T. Kovacs, Contribution for the calibration and the use of surface temperature sensors, in Proceedings of TEMPMEKO 2001, 8th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. By B. Fellmuth, J. Seidel, G. Scholz (VDE Verlag, Berlin, 2002), pp. 1111–1116
  • BS EN ISO 8502–4:2000 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness – Part 4: Guidance on the estimation of the probability of condensation prior to paint application.
  • S.W. Allison and G.T. Gillies, Remote thermometry with thermographic phosphors: Instrumentation and applications, Rev. Sci. Instrum. 68(7) (1997) 2615–2650 [CrossRef]
  • Reduction of emissions and energy utilization of coke oven underfiring heating systems through advanced diagnostics and control (Ecocarb), European Commission Research Fund for Coal and Steel, M. Saiepour, J. Delinchant, J. Soons, F. Huhn, J. Morris, Final Report. ISBN 978-92-79-29187-6
  • G. Sutton, A. Levick, G. Edwards, and D. Greenhalgh, A combustion temperature and species standard for the calibration of laser diagnostic techniques, Combustion and Flame 147 (2006) 39–48
  • J.C. Jones, Suggestions Towards Improved Reliability of Thermocouple Temperature Measurement in Combustion Tests, in Thermal Measurements: The Foundation of Fire Stan dards, Gritzo LA , Alvares N, ASTM STP1427 (2003)