Open Access
17th International Congress of Metrology
Article Number 03006
Number of page(s) 6
Section Applications en débitmétrie des gaz / Applications in gaz flow
Published online 21 September 2015
  • W.G. Andrew, Applied Instrumentation in the Process Industries Volume 1: A Survey (Gulf Publishing Company, Texas, 1974) [Google Scholar]
  • R.W. Miller, Flow Measurement Engineering Handbook (McGraw-Hill, New York, 1996). [Google Scholar]
  • W. Guthrie and Hung-kung Liu, Hands-on Workshop on Estimating and Reporting Measurement Uncertainty, NCSLI Conference, pp. 7–107 (St. Paul, Minnesota, USA, March 2008). [Google Scholar]
  • ISO/TAG 4/WG 1, Guide to the Expression of Uncertainty in Measurement (International Standards Organization, Geneva, 1993) [Google Scholar]
  • L.O. Olsen, Introduction to Liquid flow Metering and Calibration of Liquid Flowmeters, National Bureau of Standards Technical Note 831 (NIST, USA, 1974) [Google Scholar]
  • ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories (International Standards Organization, Geneva, 2005) [Google Scholar]
  • Haefelfinger, Honegger, Gfeller, A Novel Concept of a High Accuracy Calibration Rig, (14th Congres International de Metrologie, Paris, France, 22–25 Juin 2009) [Google Scholar]
  • Christopher David and Pierre Claudel, Novel Water Flow Facility in France Range Extension to Low Flow Rates (10 000 ml/h down to 1 ml/h), MAPAN - Journal of Metrology Society of India, Vol. 26, No. 3, pp. 203–209 (2011) [Google Scholar]
  • ASME MFC-11–2006, Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters, (ANSI, USA, 2014) [Google Scholar]
  • ISO 11631:1998(E), Measurement of fluid flow—Methods of specifying flowmeter performance (International Standards Organization, Geneva, 1998) [Google Scholar]
  • ISO 9368–1:1990(E), Measurement of liquid flow in closed conduits by the weighing method—Procedures for checking installations—Part 1: Static weighing systems (International Standards Organization, Geneva, 1990) [Google Scholar]
  • ISO 5168:2005(E), Measurement of fluid—Procedures for the evaluation of uncertainties (International Standards Organization, Geneva, 2005) [Google Scholar]
  • ISO 4185–1980(E), Measurement of liquid flow in closed conduits—Weighing method (International Standards Organization, Geneva, 1980) [Google Scholar]
  • ANSI/NCSL Z540.3–2006, Requirements for the Calibration of Measuring and Test Equipment (ANSI, USA, 2006) [Google Scholar]