Open Access
Issue
2015
17th International Congress of Metrology
Article Number 03005
Number of page(s) 5
Section Applications en débitmétrie des gaz / Applications in gaz flow
DOI https://doi.org/10.1051/metrology/20150003005
Published online 21 September 2015
  • ISO 5167, Measurement of fluid flow by means of orifice plates nozzles and ventury tubes inserted in circular cross section conduits running fuel, (2003)
  • AGA-3, ‘Orifice Metering of Natural Gas and the Related Hydrocarbone Fuels”, (1980)
  • Yeh, T.T and Mattingly, G. E, “Flow meter installation effects due to a generic header”. NIST Technical note 1419, (1996)
  • Gallagher J. Flow conditioning, Why, What, When and where, Siminarion Avanzado de Medition de Flujo de fluidos, Aguascalientes, Ags, Mexico, September 2009
  • Rans, R. & al , Flow Conditioning and Effects on Accuracy for Fluid measurement, 7th East Asia Hydrocarbon Flow Measurement Workshop 5th—7th, Malisia, March (2008)
  • Laribi B. and al, Numerical simulation of flow development downstream four perforated plates for flow measurement accuracy, ASME Fluids Engineering Division Summer Meeting, FEDSM’14, Chicago, USA, July 2014.
  • Bukhari Manshoor and Amir Khalid, ’ Numerical Investigation of the Circle Grids Fractal Flow Conditioner for Orifice Plate Flowmeters’, Applied Mechanics and Materials, Vol.229–231, pp. 700–704, Nov 2012.
  • Laribi B. and Ait-Amrane A, ‘Numerical analysis of the discharge coefficient with disturbers for flowmetring accuracy on flow measurement‘, 16th International Metrology Congress – Paris, October 2013.
  • Darin L. & Bowles E. B., Conditioning On Gas Measurement, Pipeline & Gas Journal, PP 59–62 (2008)
  • Fluent v6.3, Fluent incorporated, Journal Centerra source park, USA, 2006.
  • B. Laribi and al, Numerical investigation of contribution of three flow conditioners in the development and establishment of turbulent flows, Proceedings of ASME 2010 3rd joint US-European Fluids Engineering Summer Meeting, and 8th International Conference on Nanochannels, Microchannels and Minichannels, FEDSM2010-ICNMM2010, Montreal, Canada, 2010.
  • B. Laribi and al, Numerical investigation of turbulent models in the development and establishment of turbulent flows with flow conditioners, Proceedings of ASME 2010 3rd joint US-European Fluids Engineering Summer Meeting, and 8th International Conference on Nanochannels, Microchannels and Minichannels, FEDSM2010-ICNMM2010, Montreal, Canada, 2010.