201718th International Congress of Metrology
|Number of page(s)||5|
|Section||Energy New Age / Energie New Age|
|Published online||18 September 2017|
Modeling and evaluation of the energy saving under the improvements of the calibrators of temperature using by finite element method
1 National Scientific Centre „Institute of Metrology“, 42, Myronosytska str., 61002, Kharkiv, Ukraine
2 Kharkiv National Automobile and Highway University, 25, Yaroslava Mudrogo str., 61002, Kharkiv, Ukraine
3 O.M. Beketov National University of Urban Economy in Kharkiv, 17, Marshal Bazhanov str., 610002, Kharkiv, Ukraine
* Corresponding author: firstname.lastname@example.org
Energy saving and rational use of energy resources is a priority direction for the development of the Ukrainian economy. Reduction of costs for production, performance of works and provision of services of specified quality is determined by the Law of Ukraine on energy saving . The oil, gas and oil refining industry of Ukraine is one of the strategic sectors of the economy, which provides the needs of industrial enterprises, housing and motor transport complex. Metrological support of oil and gas wells for the assessment of their technical condition is carried out using the deep recording manometers. The pressure and temperature of the well are one of the main parameters that are used both to establish the working regime of the formation and the well, and to select the type and regime of the oilfield equipment.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.