Issue |
2017
18th International Congress of Metrology
|
|
---|---|---|
Article Number | 04001 | |
Number of page(s) | 8 | |
Section | Electrical Metrology for industry / Métrologie éléctrique pour l’industrie | |
DOI | https://doi.org/10.1051/metrology/201704001 | |
Published online | 18 September 2017 |
EMPIR project TracePQM: Traceability routes for electrical power quality measurements
1 Czech Metrology Institute (CMI), Okružní 31, 638 00 Brno, Czech Republic
2 Bulgarian Institute of Metrology (BIM), Boulevard G.M. Dimitrov 52-B, 1040 Sofia, Bulgaria
3 Centro Español de Metrología (CEM), C/del Alfar 2, 28760 Tres Cantos, Madrid, Spain
4 Sveuciliste U Zagrebu Fakultet Elektrotehnike I Racunarstva (HMI-FER/PEL), Unska 3, 10000 Zagreb, Croatia
5 Institut za mjeriteljstvo Bosne i Hercegovine (IMBIH), Augusta Brauna 2, 71000 Sarajevo, Bosnia and Herzegovina
6 Istituto Nazionale di Ricerca Metrologica (INRIM), Strada delle Cacce 91, 10135 Torino, Italy
7 Justervesenet (JV), Fetveien 99, 2007 Kjeller, Norway
8 Laboratoire national de métrologie et d’essais (LNE), 1 rue Gaston Boissier, 75724 Paris Cedex 15, France
9 AS Metrosert (Metrosert), Teaduspargi 8, 12618 Tallinn, Estonia
10 National Standards Authority of Ireland (NSAI), 1 Swift Square, Santry, Dublin 9, Ireland
11 Slovenski Institut za Kakovost in Meroslovje (SIQ), Tržaška cesta 2, 1000 Ljubljana, Slovenia
12 RISE Research Institutes of Sweden AB, PO Box 857, E-50115, Borås, Sweden
13 Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK), Ataturk Bulvari 221, 06100 Ankara, Turkey
* Corresponding author: vnovakovazachovalova@cmi.cz
Increasing demand for traceable, accurate measurements of power and power quality (PQ) parameters has resulted in an intensive metrology research effort in this area. This paper describes the objectives and activities of EMPIR project 15RPT04 TracePQM, jointly funded by the European Union and the participating countries. The overall goal of this project is to develop and validate a modular, well documented metrology grade system for the measurement of power and PQ parameters using digital sampling techniques. The first results of the research project, including the description of the system design, the software structure, results of the stability tests on wideband digitizers, and the acquisition of extended waveform records using a digitizing multimeter are presented.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.