| Issue |
2015
17th International Congress of Metrology
|
|
|---|---|---|
| Article Number | 13001 | |
| Number of page(s) | 2 | |
| Section | Tendance en métrologie 3D / Trends in coordinate measurement | |
| DOI | https://doi.org/10.1051/metrology/20150013001 | |
| Published online | 21 September 2015 | |
EPJ Web of Conferences : Application du concept « Lean Manufacturing » dans un atelier de fabrication moteur.
PSA Peugeot Citroën Automobiles, DRD/DCTC/CIMB/CIUO/ITPU/UPQM, 18 rue des Fauvelles 92256 La Garenne-Colombes Cedex, FRANCE
Correspondance de l’auteur : florian.bonzon@mpsa.com
Abstract
In 2011, PSA launched a brand new 3 cylinder petrol engine in the Tremery plant. A new workshop wascompletely designed according to the Lean Manufacturing concepts. Indeed the metrology room was thus designedaccording the principles of just in time, just requisite, smoothed activities. Internal flow of parts was optimized, tasks were reorganized within the metrology and the planning of inspections was coordinated with the needs of the production line. We also re-examined our control policy, in particular we introduced the form measurement on CMM.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.