Article's citations

Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme strong>CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

Metrological characterization of 3D imaging systems: progress report on standards developments

J.-Angelo Beraldin, David Mackinnon, Luc Cournoyer

Publié en ligne : 2015-09-21

DOI: https://doi.org/10.1051/metrology/20150013003

Citations de cet article :

Performance Evaluation of MEMS-Based Automotive LiDAR Sensor and Its Simulation Model as per ASTM E3125-17 Standard

Arsalan Haider, Yongjae Cho, Marcell Pigniczki, et al.
Sensors 23 (6) 3113 (2023)
DOI: 10.3390/s23063113
Voir cet article

Handbook of Cultural Heritage Analysis

Adriana Bandiera and J-Angelo Beraldin
Handbook of Cultural Heritage Analysis 1529 (2022)
DOI: 10.1007/978-3-030-60016-7_52
Voir cet article

A new metrological characterization strategy for 3D multi-camera systems

Michaela Servi, Francesco Buonamici, Luca Puggelli and Yary Volpe
International Journal on Interactive Design and Manufacturing (IJIDeM) 15 (1) 69 (2021)
DOI: 10.1007/s12008-020-00721-5
Voir cet article

Ya-Jing Wu, Bing-Lin Ho, Hao-Yuan Lin, Ju-Yi Lee and Mang Ou-Yang
1 (2021)
DOI: 10.1109/MMA52675.2021.9610953
Voir cet article

Testing the Sandblasting Process in the Manufacturing of Reference Spheres for Non-Contact Metrology Applications

Víctor Meana, Eduardo Cuesta and Braulio J. Álvarez
Materials 14 (18) 5187 (2021)
DOI: 10.3390/ma14185187
Voir cet article

A Procedure for the Characterization and Comparison of 3-D LiDAR Systems

Stefano Cattini, Davide Cassanelli, Luca Di Cecilia, Luca Ferrari and Luigi Rovati
IEEE Transactions on Instrumentation and Measurement 70 1 (2021)
DOI: 10.1109/TIM.2020.3043114
Voir cet article

Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing

Maria Grazia Guerra, Fulvio Lavecchia and Luigi Maria Galantucci
Lecture Notes in Mechanical Engineering, Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing 173 (2020)
DOI: 10.1007/978-3-030-46212-3_12
Voir cet article

3D Imaging, Analysis and Applications

Marc-Antoine Drouin and Ismail Hamieh
3D Imaging, Analysis and Applications 167 (2020)
DOI: 10.1007/978-3-030-44070-1_4
Voir cet article

3D Imaging, Analysis and Applications

Marc-Antoine Drouin and Jean-Angelo Beraldin
3D Imaging, Analysis and Applications 109 (2020)
DOI: 10.1007/978-3-030-44070-1_3
Voir cet article

Advances in Computer Vision

Sajjad Sayyar-Roudsari, Sameer A. Hamoush, Taylor M. V. Szeto and Sun Yi
Advances in Intelligent Systems and Computing, Advances in Computer Vision 944 608 (2020)
DOI: 10.1007/978-3-030-17798-0_49
Voir cet article

Optical Characterization of the Beams Generated by 3-D LiDARs: Proposed Procedure and Preliminary Results on MRS1000

Stefano Cattini, Luca Di Cecilia, Luca Ferrari and Luigi Rovati
IEEE Transactions on Instrumentation and Measurement 69 (10) 7796 (2020)
DOI: 10.1109/TIM.2020.2984137
Voir cet article

Stefano Cattini, Luigi Rovati, Luca Di Cecilia and Luca Ferrari
1 (2020)
DOI: 10.1109/I2MTC43012.2020.9128651
Voir cet article

TraceableX,Yself-calibration at single nm level of an optical microscope used for coherence scanning interferometry

Peter Ekberg and Lars Mattsson
Measurement Science and Technology 29 (3) 035005 (2018)
DOI: 10.1088/1361-6501/aaa39d
Voir cet article

Performance verification of a photogrammetric scanning system for micro-parts using a three-dimensional artifact: adjustment and calibration

F. Lavecchia, M. G. Guerra and L. M. Galantucci
The International Journal of Advanced Manufacturing Technology 96 (9-12) 4267 (2018)
DOI: 10.1007/s00170-018-1806-3
Voir cet article

Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing

Luigi Maria Galantucci, Maria Grazia Guerra and Fulvio Lavecchia
Lecture Notes in Mechanical Engineering, Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing 57 (2018)
DOI: 10.1007/978-3-319-89563-5_4
Voir cet article

Novel metrics and methodology for the characterisation of 3D imaging systems

John R. Hodgson, Peter Kinnell, Laura Justham, Niels Lohse and Michael R. Jackson
Optics and Lasers in Engineering 91 169 (2017)
DOI: 10.1016/j.optlaseng.2016.11.007
Voir cet article

On the Performance of the Intel SR300 Depth Camera: Metrological and Critical Characterization

Monica Carfagni, Rocco Furferi, Lapo Governi, et al.
IEEE Sensors Journal 17 (14) 4508 (2017)
DOI: 10.1109/JSEN.2017.2703829
Voir cet article