201718th International Congress of Metrology
|Nombre de pages||7|
|Section||Applied thermal measurements / Mesures thermiques appliquées|
|Publié en ligne||18 septembre 2017|
Home-made software development for optimizing the uncertainty evaluation of silver fixed point cell used for practical realization of ITS-90
1 Turkiye Bilimsel ve Teknolojik Arastirma Kurumu, Gebze Yerleşkesi, 41470 Gebze/Kocaeli, Turkey
2 Fakultet strojarstva i brodogradnje, Ulica Ivana Lučića 5, 10000, Zagreb, Croatia
3 Laboratoire national de métrologie et d’essais, 29, Avenue Roger Hennequin, 78190 Trappes, France
4 Institut za mjeriteljstvo Bosne i Hercegovine, Augusta Brauna br.2, 71 000 Sarajevo, Bosna i Hercegovina
5 MoE - Directorate of measures and precious metals, Mike Alasa 14, 11000 Belgrade, Republic of Serbia
6 National Standards Authority of Ireland, Griffith Avenue Extension, Glasnevin Dublin 9, Ireland
7 Univerza v Ljubljani, Kongresni trg 12, 1000 Ljubljana, Slovenia
In order to enhance the availability of facilities in the field of high temperature contact thermometry in European emerging National Metrology Institutes (NMIs) and Designated Institutes (DIs), where access to types of facilities is currently limited an EMPIR Research Potential Project named Eura- Thermal has been launched. This project develop skills and tools for less experienced NMIs/DIs in order to acquire the required knowledge and expertise in temperature metrology.
Within the frame of the work package dedicated to contact thermometry, the work is focused on the silver fixed point cell which is one of the fixed points defined by the International Temperature Scale of 1990 (ITS-90). In this way, the traceability for the practical realization of the kelvinin accordance with the International System of Units (SI) would be provided with the lowest uncertainties.
The home-made software has been developed in Lab View language which includes and standardizes the validated measurement procedure. Moreover, the software provides a practical tool for the evaluation of uncertainties according to the “Guide to the expression of uncertainty in measurements". This enables to quantifying the main component contribution on uncertainty budget during the realization of the Silver fixed point cell measurements.
Performance and usefulness of the software and evaluation of uncertainty will be discussed in this paper.
This work is funded through the European Metrology Programme for Innovation and Research (EMPIR) project “RPT05 - EuraThermal”. EMPIR is jointly funded by the EMPIR participating countries within EURAMET and the European Union.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.