201718th International Congress of Metrology
|Nombre de pages||11|
|Section||Applied thermal measurements / Mesures thermiques appliquées|
|Publié en ligne||18 septembre 2017|
Measurement of the thermal conductivity of liquids by hot wire method: comparison between transient and stationary approaches
1 THEMACS Engineering, 23 rue Alfred Nobel, 77420 Champs-sur-Marne, France
2 CERTES / OSU Efluve, Université Paris-Est Creteil, 61 avenue du Général de Gaulle, 94010 Créteil Cedex, France
* Corresponding author: firstname.lastname@example.org
This work concerns the characterization of the thermal conductivity of liquids by hot wire method. A measuring cell has been specially developed for this study. The method of analysing the transient response makes it possible to obtain values of conductivity close to those expected (deviations <4%) for two reference fluids and measurement uncertainties in the order of 5%. The use of the so-called steady state method (ASTM D 2717) leads to relative deviations and uncertainties of the measurements about 3 times higher.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.