201517th International Congress of Metrology
|Nombre de pages||3|
|Section||Défis en mécanique / Challenges in mechanics|
|Publié en ligne||21 septembre 2015|
Fabrication additive et besoins en contrôle
1 LCM, LNE, département dimensionnel, 75015 Paris, France
2 Ecole Centrale de Nantes, 44321 Nantes, France
3 AFPR, 92360 Meudon-La-Forêt, France
a Corresponding author: email@example.com
Additive manufacturing is under such media coverage that many manufacturers have recently integrated this process into their production line or investigate this possibility. However, all new application of a technology in the industry reveals needs in metrology and testing. A partnership between the Association Française de Prototypage Rapide and the Laboratoire national de métrologie et d’essais has identified these needs. This paper presents a state of the art on additive manufacturing and metrology and testing requirements generated by the technology.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.