Numéro |
2013
16th International Congress of Metrology
|
|
---|---|---|
Numéro d'article | 06010 | |
Nombre de pages | 5 | |
Section | Les avancées en mesure 3D et Dimensionnel / Advanced coordinate metrology & Dimensional | |
DOI | https://doi.org/10.1051/metrology/201306010 | |
Publié en ligne | 7 octobre 2013 |
Performance studies in micropipette calibration
IPQ - Instituto Português da Qualidade, Rua António Gião, 2, 2829-513, Caparica, Portugal
a Corresponding author: nalmeida@ipq.pt
The measurement of small amounts of liquids is very important in fields like, health, chemistry, microbiology and genetics. The most common used instruments for delivery of liquids, in the order of the microliter, are micropipettes or piston pipettes, of fixed or variable volume, with positive or air displacement operation. The method used in the calibration of micropipettes is the gravimetric method, which is the determination of the delivered mass of distilled water, at a reference temperature of 20°C. This method is based on ISO 8655 and ISO 4787. In order to verify the influence of specific experimental details of the normalized procedure described in ISO 8655–6, several experimental tests were performed by the Volume Laboratory of The Portuguese Institute of Quality, namely: Angle variation of aspiration and delivery of liquid; Immersion depth of the tip; Aspiration and delivery velocity; Type of tip and Altitude. This study will allow the improvement of the calibration procedure of micropipettes and the harmonization of the results between laboratories.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.