Open Access
Issue
2017
18th International Congress of Metrology
Article Number 08004
Number of page(s) 20
Section Energy New Age / Energie New Age
DOI https://doi.org/10.1051/metrology/201708004
Published online 18 September 2017
  • Buildings - European Commission. Available online: https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings
  • Directive 2012/27/EU of The European Parliament and of the Council of 25 October 2012 on energy efficiency, amending Directives 2009/125/EC and 2010/30/EU and repealing Directives 2004/8/EC and 2006/32/EC, Official Journal of the European Union n. L 315/1 of the 14.11.2012
  • Decreto Legislativo 4 luglio, n. 102 “Attuazione della direttiva 2012/27/UE sull’efficienza energetica, che modifica le direttive 2009/125/CE e 2010/30/UE e abroga le direttive 2004/8/CE e 2006/32/CE”, Gazzetta Ufficiale n. 165 del 18/7/2014
  • OIML R 75-1, Heat Meters - Part 1: General Requirements, International Organization of Legal Metrology, Paris, 2002
  • EN 1434-1, Heat Meters - Part 1: General Requirements, European Committee for Standardization, Brussels, 2007
  • Directive 2004/22/EC of the European Parliament and of the Council of 31 March 2004 on measuring instruments. Official Journal of the European Union
  • EN 442-1 Radiators and Convectors - Part 1: Technical Specification and Requirements; European Committee for Standardization: Brussels, Belgium, 2014
  • EN 442-2 Radiators and Convectors - Part 2: Test Methods and Rating; European Committee for Standardization: Brussels, Belgium, 2014
  • EN 834 Heat Cost Allocators for the Determination of the Consumption of Room Heating Radiators. Appliances with Electrical Energy Supply; European Committee for Standardization: Brussels, Belgium, 2013
  • UNI/TR 11388 Sistemi di Ripartizione Delle Spese di Climatizzazione Invernale Utilizzante Valvole di Corpo Scaldante e Totalizzatore dei Tempi di Inserzione; Ente Nazionale Italiano di Unificazione: Milano, Italy, 2010
  • UNI 10200, Impianti termici centralizzati di climatizzazione invernale e produzione di acqua calda sanitaria – Criteri di ripartizione delle spese di climatizzazione invernale ed acqua calda sanitaria, Ente Nazionale Italiano di unificazione, Milano, 2013
  • L. Celenza, M. Dell’Isola, G. Ficco, B.I. Palella, G. Riccio, Energy and Buildings, 95, 47–56 (2015) [CrossRef]
  • G. Ficco, L. Celenza, M. Dell’Isola, P. Vigo, Energy and Buildings, 130, 477–487 (2016) [CrossRef]
  • F. Arpino, G. Cortellessa, M. Dell’Isola, G. Ficco, R. Marchesi, C. Tarini, Energy Procedia, 101, 74–80 (2016) [CrossRef]
  • F. Saba, V. Fernicola, M.C. Masoero, S. Abramo, Buildings, 7, 20 (2017) [CrossRef] [EDP Sciences]
  • F. Bari, D. Mereu, C. Damarco, C. Greco, S. Malan, G. Marchetto, S.R. Tirado, R. Tisseur, M. Violante, G. Zangari, et al., Energy Procedia, 78, 2977–2982 (2015) [CrossRef]
  • C. Marinari, F. Saba, M. Orio, Preliminar Verification of the Functionality and the Accuracy of Heat Metering and Cost Allocation Devices at the INRIM Central Heating System Simulator: The EcoThermo Soft-Sensor Procedure (Technical Report n°9/2015, INRIM, Torino, Italy, 2015)
  • C. Marinari, F. Saba, F. Grisotto, M. Orio, M. Masoero, Energy Procedia, 78, 2304–2309 (2015) [CrossRef]
  • IAPWS 2007 Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam; International Association for the Properties of Water and Steam, Lucerne, Switzerland, 2007
  • IAPWS Advisory Note No. 1 Uncertainties in Enthalpy for the IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use (IAPWS-95) and the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97); International Association for the Properties of Water and Steam, Vejle, Denmark, 2003