Open Access
Issue
2017
18th International Congress of Metrology
Article Number 02003
Number of page(s) 6
Section Flow Metering / Debimetrie
DOI https://doi.org/10.1051/metrology/201702003
Published online 18 September 2017
  • C. Barbe, “BOUCLE EVEREST 2.0 - Caractérisation des mesures de débits références”, EDF R&D, (2015)
  • Measurement of fluid flow by means of pressure differential devices inserted in circular-cross section conduits running full, Part 1: General principles and requirements, ISO 5167-1 (2003)
  • Measurement of fluid flow by means of pressure differential devices inserted in circular-cross section conduits running full, Part 2: Orifice plates, ISO 5167-2 (2003)
  • J. Veau, L. Ulpat, “Mesure de débit par ultrasons sur une tuyauterie en composite dans une centrale nucléaire”, 15th International Congress of Metrology Proc. (2011)
  • B. Kadir, “Mesure de débit par ultrasons - Mesure en conduite pleine - Mesure en conduite pleine”, r2265, Techniques de l’ingénieur, (2012)
  • J. Veau, O. Piedfer, “Retour d’expérience d’une mesure de débit par diaphragme à EDF”, 15th International Congress of Metrology Proc. (2011)
  • O. Deneux, J.M. Favennec, J. Veau, J. Antunes, O. Piedfer, “Using CFD for metrology prediction in flowmetering: RCS flow measurement with elbow taps”, ASME 2013 Power Conference Proc. (2013)
  • O. Deneux, M. Arenas, “CFD and metrology in flowmetering: RCS flow measurement with elbow taps and its uncertainty”, 16th International Congress of Metrology Proc. (2013)
  • S. Benhamadouche, W.J. Malouf, M. Arenas, “Effects of meshing and RANS turbulence modelling on the numerical prediction of a flow through a square edged orifice in a round pipe”, IHAR 2015, (2015)
  • N. Lancial, M. Arenas, H. Gamel, N. Dessachy, E. Thibert, J. Veau, “Pressure loss prediction by numerical simulations through a square-edged orifice in a round pipe”, FLOMEKO (2016)