Open Access
Issue
2015
17th International Congress of Metrology
Article Number 13008
Number of page(s) 6
Section Tendance en métrologie 3D / Trends in coordinate measurement
DOI https://doi.org/10.1051/metrology/20150013008
Published online 21 September 2015
  • A.N.M. Santos. MsC Dissertation, Universidade de Brasília, DF, Brasil. (2012) (in portuguese)
  • C.R.G. Lima. MsC Dissertation, Universidade Federal de Santa Catarina -UFSC. (2006) (in portuguese)
  • L.A.R. Nerosky. MsC Dissertation, Universidade Federal de Santa Catarina—UFSC. (2001) (in portuguese)
  • C.M. Vrhovec and M. Munich. Proc. IEEE/RSJ Int. Conf. Intelligent Robots and Systems (ICRA), Roma, Italy, pp. 697–702. (2007).
  • S. Lin, P. Wang, Y. Fei. Int. J. Adv. Manuf. Technol., 879–886. (2005)
  • J. Santolaria, J. Yague, J. Pastor. Precision Engineering, vol. 32, no. 4, pp. 251–268. (2008) [CrossRef]
  • W. Cheng, Y. Fei, L. Yu. Proc. SPIE 2010, 6th Int. Symp. Prec. Eng. Measurements and Instrumentation, Hangzhou, China, p. 75445. (2010)
  • E. Cuesta, B. Álvarez, J. Barreiro, D. Madruga. Proc. 4th Manuf. Eng. Soc. Int. Conference. (2012)
  • U. Mutilba, G. Kortaberria, A. Olarra, A. Guitérrez. J. Mech. Engineering and Automation, 602–608. (2013)
  • D. Madruga, E. Cuesta, J. Barreiro, A. Fernandez-Abia. Sensors, Vol.13. (2013)
  • D. Madruga, E. Cuesta, J. Alvarez, J. Barreiro. Meas. Sci. and Technology, Vol.25. (2014)
  • A. Piratelli-Filho, A.R. Lesnau. Measurement, 43, 296–244. (2010) [CrossRef]
  • A. Piratelli-Filho, F.H.T. Fernandes, R.V. Arencibia. Precision Engineering, 36, 349–355. (2012) [CrossRef]
  • C. Diaz. Concept for an Algorithm Testing and Evaluation Program at NIST, National Institute of Standards and Technology. (1994)
  • C.M. Shakarji. Least-Squares Fitting Algorithms of the NIST Algorithm Testing System, National Institute of Standards and Technology. (1998)
  • http://www.nist.gov/pml/div683/grp01/cstalgorithmtesting.cfm, acessed in 01/07/2015.