Open Access
| Issue |
2015
17th International Congress of Metrology
|
|
|---|---|---|
| Article Number | 12007 | |
| Number of page(s) | 5 | |
| Section | Amélioration des références électriques / Improvement in electrical standards | |
| DOI | https://doi.org/10.1051/metrology/20150012007 | |
| Published online | 21 September 2015 | |
- Pöpel R., Metrologia, 29 pp. 153–174, (1992). [CrossRef] [Google Scholar]
- Huntley L.: A, IEEE Trans. Instr. Meas., IM-36,. 4, pp. 908–912, (1987). [CrossRef] [Google Scholar]
- Witt T.J, Proc. of IEEE Science, Measurement and Technology, 149, 6, pp. 305–312 , (2002). [CrossRef] [Google Scholar]
- Fluke Corporation, Calibration: Philosophy in Practice, Second Edition. [Google Scholar]
- G. Rietveld, Artifact calibration: An evaluation of the Fluke 5700A series II calibrator, Rep. ISBN 90-9-0013-0322-4, (1999). [Google Scholar]
- Capra P.P, Galliana F., arXiv:1505.04398v1 [physics. ins-det, (2015) . [Google Scholar]
- D. Reymann et al., Proc. of the Prec. El. Measur. Conf, pp. 253–254, (2000). [Google Scholar]
- Hamilton C. A IEEE Trans. Instr. Meas., 54, 1, pp. 215–221, (2005). [CrossRef] [Google Scholar]
- Graetsch V., Staben E., Bachmair H., Proc. of the Prec. El. Measur. Conf, pp. 14–15, (1988). [Google Scholar]
- Latika S.R Becker, Bruce F. Field, Thomas E. Kiess, IEEE Trans. on Instrum. and Meas., Vol. IM-35 4, pp. 383–386, (1986). [CrossRef] [Google Scholar]
- Callegaro L, D’Elia V., Capra P. P.,. Sosso A, , IEEE Trans. Instr. Meas., 56, 2, pp. 295–299, (2007). [CrossRef] [Google Scholar]
- Marullo Reedtz G., Cerri R., IEEE Trans. on Instrum. and Meas., 48, 2, pp. 338–341, (1999). [CrossRef] [Google Scholar]