Open Access
Issue
2015
17th International Congress of Metrology
Article Number 04004
Number of page(s) 5
Section Défis en mécanique / Challenges in mechanics
DOI https://doi.org/10.1051/metrology/20150004004
Published online 21 September 2015
  • Karl Hoffmann, An Introduction to Stress Analysis and Transducer Design using Strain Gauges, (HBM 2012), available at http://www.hbm.com
  • HBM, Operating manual Digital precision measuring amplifier DMP40, DMP40S2
  • HBM, Operating manual Bridge Calibration Unit for 225Hz BN100A
  • D. Corminboeuf and F. Overney, Inductive voltage divider calibration with sampling method, EPJ Web of Conferences 77, 00014 (2014), available at http://dx.doi.org/10.1051/epjconf/20147700014 [CrossRef] [EDP Sciences]
  • G. Ramm, Calibration of bridge standards for use in strain-gage measurements, Reports in Applied Measurement RAM, Vol. 6, S. 26–30, (1990)