Open Access
Issue |
2013
16th International Congress of Metrology
|
|
---|---|---|
Article Number | 15009 | |
Number of page(s) | 8 | |
Section | Température : certains l’aiment chaud / Temperature: Some like it hot | |
DOI | https://doi.org/10.1051/metrology/201315009 | |
Published online | 07 October 2013 |
- G. Machin, K. Anhalt, P. Bloembergen, J. Hartmann, M. Sadli, P. Saunders, E. Woolliams, Y. Yamada,H. Yoon. “Mise-en-Pratique of the Kelvin at High Temperature” CCT documents : http://www.bipm.org/cc/CCT/Allowed/25/D12r_MePHT_v8.pdf http://www.bipm.org/cc/CCT/Allowed/25/D13_MePdirect_method_v3.1.pdf http://www.bipm.org/cc/CCT/Allowed/25/D14_MePindirect_method_v3.1.pdf [Google Scholar]
- S. Briaudeau, B. Rougie, M. Fanjeaux, M. Sadli, G. Bonnier “Thermodynamic temperature determination in high temperature range at BNMINM” Proceedings of 9th International Symposium on Temperature and Thermal Measurements in Industry and Science, Tempmeko ’04, ed. D. Zvizdic, L.G. Bermanec, T. Stasic, T. Veliki, LMP/FSB, pp 119–125, Cavtat – Dubrovnik, 2004. [Google Scholar]
- S. Briaudeau, M. Sadli, F. Bourson, B. Rougié, A. Rihan, J.-J. Zondy, “Primary Radiometry for the mise-enpratique: The Laser-Based Radiance Method Applied to a Pyrometer”, Int. J. of Thermophysics 32, 2183–2196 (2011). [CrossRef] [Google Scholar]
- G. Machin, P. Bloembergen, J. Hartmann, M. Sadli, Y. Yamada “A concerted international project to establish high-temperature fixed points for primary thermometry”, Int J Thermophysics, 28, 6, (2007), 1976–1982. [Google Scholar]
- K. Anhalt, R.D. Taubert, G. Machin, E. Woolliams, M. R. Dury, H. Yoon, M. Sadli, S. Briaudeau, B. Khlevnoy, M. Ballico, F. Jahan, A. Todd, D. Woods “A comparison of absolute radiometry by metal-carbon eutectic fixed points” 9th International Temperature Symposium, 17th-23rd March 2012, Anaheim, CA (USA). [Google Scholar]
- S. Briaudeau, B. Rougié, M. Sadli, A. Richard et J.M. Coutin “Optical diffraction corrections in radiometric thermodynamic determination”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007. [Google Scholar]
- G. Machin, J. Engert, R. Gavioso, M. Sadli, E. Woolliams “The Euramet Metrology Research Programme Project Implementing the New Kelvin (InK)” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]
- Yamada Y, Sakate H, Sakuma F, Ono A, Proc. 7th Int. Symp. on Temperature and Thermal Measurements in Industry and Science (Tempmeko) pp 535–40, (1999). [Google Scholar]
- G. Machin, P. Bloembergen, K. Anhalt, J. Hartmann, M. Sadli, P. Saunders, E. Woolliams, Y. Yamada, H. Yoon “Practical Implementation of the Mise en Pratique for the Definition of the Kelvin Above the Silver Point” Int. J. Thermophysics, 31, 1779–1788 (2010). [Google Scholar]
- M. Sadli, G. Machin, D. Lowe, J. Hartmann, R. Morice, Proc. 8th Int. Symp. On Temperature and Thermal Measurements in Industry and Science (Tempmeko) pp 507–12, (2001). [Google Scholar]
- R. Morice, E. Devin, Proc. of Tempmeko ’01, ed. B. Fellmuth, J. Seidel, G. Scholz, Berlin, VED VERLAG GMBH, 2002, pp 73–78 (2001). [Google Scholar]
- G. Machin, G. Beynon, F. Edler, S. Fourrez, J. Hartmann, D. Lowe, R. Morice, M. Sadli, M. Villamañan, Proc. Temperature: Its Measurement and Control in Science and Industry, 7(Chicago, USA) AIP Conf. Proc. 684 285–90 (2002). [Google Scholar]
- M. Sadli, M. Fanjeaux, G. Bonnier, Proc. Temperature: Its Measurement and Control in Science and Industry, 7 (Chicago, USA) AIP Conf. Proc. 684 267–72 (2002). [Google Scholar]
- R. Morice, M. Megharfi, Favreau J.O., Morel E., Didialaoui I., Filtz J.R., Proc. of 9th International Symposium on Temperature and Thermal Measurements in Industry and Science, Tempmeko ’04, ed. D. Zvizdic et al, pp 847–852, Cavtat – Dubrovnik, 2004. [Google Scholar]
- M. Sadli, F. Bourson, M. Fanjeaux, S. Briaudeau, B. Rougié, G. Bonnier “Study of metal-carbon eutectic points : from construction to temperature determination”, Proc. of 9th International Symposium on Temperature and Thermal Measurements in Industry and Science, Tempmeko ’04, ed. D. Zvizdic et al, pp 611–616 (2004). [Google Scholar]
- M. Sadli, F. Bourson, S. Briaudeau, T. Deuzé, G. Failleau, E. Agnandji, M. Ojanen, B. Rougié, “Review and prospects of the high temperature metrology activities at LNE-Cnam”, proceedings électroniques du 15ème Congrès International de Métrologie (Métrologie 2011). [Google Scholar]
- M. Sadli, R. Morice, F. Bourson, S. Briaudeau, T. Deuzé, G. Failleau, J. Favreau, N. Fleurence, B. Rougié “Nouvelles Références à Haute Température à Base d’Alliages Eutectiques Métal-Carbone” Actes du Congrès de la Société Franç;aise de Thermique, Le Touquet 25-28 mai 2010. [Google Scholar]
- F. Bourson, S. Briaudeau, B. Rougié, M. Sadli, Tempbeijing 2008, October 2008, Beijing, Popular Republic of China (2008). [Google Scholar]
- M. Sadli, O. Pehlivan, F. Bourson, A. Diril, K. Ozcan, Int J Thermophys, 30, 36–46 (2009). [CrossRef] [Google Scholar]
- Y. Yamada, K. Anhalt, M. Battuello, P. Bloembergen, B. Khlevnoy, G. Machin, M. Matveyev, M. Sadli, T. Wang “Construction Of High-Temperature Fixed-Point Cells For Thermodynamic Temperature Assignment” 9th International Temperature Symposium, 17th-23rd March 2012, Anaheim, CA (USA). [Google Scholar]
- Y. Yamada, K. Anhalt, M. Battuello, P. Bloembergen, B. Khlevnoy, G. Machin, M. Matveyev, M. Sadli, A. Todd, T. Wang “Evaluation And Selection Of High-Temperature Fixed-Point Cells For Thermodynamic Temperature Assignment” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]
- G. Machin, K. Anhalt, F. Edler, J. Pearce, M. Sadli, R. Strnad, E. Vuelban “HITEMS: a pan-european project to solve high temperature measurement problems in industry”, proceedings électroniques du 15ème Congrès International de Métrologie (Métrologie 2011). [Google Scholar]
- M. Sadli, T. Bellin-Croyat, F. Bourson, T. Deuzé, A. Diril, G. Failleau, C. Journeau, D. Lowe, S. Mokdad, M. Montero, C. Parga, N. Richard, “High-Temperature Fixed Points For Industrial Applications” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]
- M. Sadli, F. Bourson, A. Diril, D. Lowe, C. Journeau, C. Parga “Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications” dans ces actes. [Google Scholar]
- L. Crovini, R. Perissi, J.W. Andrews, C. Brookes, W. Neubert, P. Bloembergen, G. Voyer, I. Wessel, High Temp. High Press. 19, 177 (1987). [Google Scholar]
- R. Morice, F. Edler, J. Pearce, G. Machin, J. Fischer, J. R. Filtz “High-Temperature Fixed-Point Facilities for Improved Thermocouple Calibration—Euromet Project 857” Int J Thermophys, 29, 231–240 (2008). [CrossRef] [Google Scholar]
- P. Saunders, J. Fischer, M. Sadli, M. Battuello, C.W. Park, Y. Zundong, H. Yoon, W. Li, E. Van der Ham, F. Sakuma, J. Ishii, M. Ballico, G. Machin, N. Fox, J. Hollandt, M. Matveyev, P. Bloembergen, S. Ugur, “Uncertainty budgets for calibration of radiation thermometers below the silver point”, Int. J. Thermophys., 29, 3, (2008), 1066–1083. [CrossRef] [Google Scholar]
- L. Johansson, J.-R. Filtz, P. DeFelice, M. Sadli, A. Plompen, B. Hay, A. Dinsdale, S. Pommé, P. Cassette, J. Keightley, “Advanced Metrology For New Generation Nuclear Power Plants”, Proc. of 2nd IMEKO TCs 11,19,20 on Metrological Infrastructure, Cavtat, Dubrovnik Riviera, Croatie, pp 77–80 (2011). [Google Scholar]
- M. Sadli, M. de Podesta, D. del Campo, T. Deuzé, G. Edwards, C. J. Elliott, G. Failleau, S. Fourrez, C. Garcia Izquierdo, M. Laurie, S. A. Mokdad, J. V. Pearce, G. Sutton “New Temperature References and Sensors for the Next Generation of Nuclear Power Plants” International Conference ANIMMA 2013, 23-27 juin 2013, Marseille (2013). [Google Scholar]
- Failleau G., Deuze T., Elliot C., Pearce J., Machin G., Briaudeau S., Sadli M., “Development of an Fe-C Eutectic Fixed-Point for the Calibration and In-Situ Monitoring of Thermocouples”, Proc. of 2nd IMEKO TCs 11,19,20 on Metrological Infrastructure, Cavtat, Dubrovnik Riviera, Croatie, pp 77–80 (2011). [Google Scholar]
- C. J. Elliott, J. V. Pearce, G. Failleau, T. Deuzé, S. Briaudeau, M. Sadli, G. Machin, “Fe-C eutectic fixedpoint cells for contact thermometry: an investigation and comparison”, Metrologia 49, 88–94 (2012). [CrossRef] [Google Scholar]
- C. J. Elliott, G. Failleau, T. Deuzé, M. Sadli, J. V. Pearce, G. Machin “Long-Term Monitoring of Thermocouple Stability with Miniature Fixed-Point Cells” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]
- G. Failleau, C.J. Elliott, T. Deuzé, J.V. Pearce, G. Machin, M. Sadli “Miniature Fixed-Point Cell Approaches For In-Situ Monitoring Of Thermocouple Stability” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]
- S. Mokdad, G. Failleau, T. Deuzé, S. Briaudeau, O. Kozlova, M. Sadli “A self-validation method for hightemperature thermocouples under oxidising atmospheres” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]
- J. Fischer et al. “Uncertainty budgets for realisation of scales by radiation thermometry” (2003) http://www.bipm.org/cc/CCT/Allowed/22/CCT03-03.pdf [Google Scholar]
- Bourson F., Sadli M., Rougié B., Briaudeau S., “Study and Comparison of Newly Developed ITS-90 Silver- and Copper-Point Cells”, Int. J. Thermophys., 32, 1602–1610 (2011). [Google Scholar]
- P. Bloembergen, Y. Yamada, N. Yamamoto, J. Hartmann “Realizing the high-temperature part of a future ITS with the aid of eutectic metal–carbon fixed points” Temperature: Its Measurement and Control in Science and Industry vol. 7 ed D C Ripple (New York: AIP) pp 291–6 (2003). [Google Scholar]
- O. Kozlova, S. Briaudeau, L. Rongione, F. Bourson, S. Guimier, S. Kosmalski, M. Sadli “Calibration of Radiation Thermometers up to 3000 °C: Effective Emissivity of the Source” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]
- H. C. McEvoy, M. J. Martin, A. Steiner, E. Schreiber, F. Girard, M. Battuello, M. Sadli, P. Ridoux, B. Gutschwager, J. Hollandt, A. Diril, Ö. Pehlivan “EURAMET Project to Examine Underlying Parameters in Radiance Temperature Scale Realisation, 156 °C to 1000 °C” soumis à Tempmeko 2013 (à paraître dans Int. J. Thermophysics). [Google Scholar]