| Issue |
2015
17th International Congress of Metrology
|
|
|---|---|---|
| Article Number | 05003 | |
| Number of page(s) | 7 | |
| Section | Qualité de l’eau / Water quality | |
| DOI | https://doi.org/10.1051/metrology/20150005003 | |
| Published online | 21 September 2015 | |
Démarche d’estimation des incertitudes de mesure dans un laboratoire de recherche : apport et perspectives - exemple d’un laboratoire de recherche en hydrologie des milieux aquatiques
1 LNE Pôle des Eco-Industries – 3, rue Raoul Follereau – 86000 POITIERS
2 INSTITUT Pprime – CNRS – Université de Poitiers – Isea/Ensma UPR CNRS 3346 Bâtiment H2 – Téléport 2 Boulevard Marie & Pierre Curie 86962 FUTUROSCOPE CHASSENEUIL cedex
Abstract
The design of hydraulic structures for the upstream migration around dams as the vertical slot fishways is very important for the engineers for applying the European Water Directive (2000/60/CE) or the French law (Lema), One of the main parameters for the design is the discharge coefficient. For guaranteeing this coefficient, an evaluation of the uncertainties has been carried out. This approach allows the identification of the different parameters which influence this measurement. Among all the parameters, the water depth and the slope measurements are the major quantities which influence the more the results of the measurements. The evaluation of the uncertainties in laboratory will be extended to the measurements of other quantities.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.