Issue |
2013
16th International Congress of Metrology
|
|
---|---|---|
Article Number | 15003 | |
Number of page(s) | 7 | |
Section | Température : certains l’aiment chaud / Temperature: Some like it hot | |
DOI | https://doi.org/10.1051/metrology/201315003 | |
Published online | 07 October 2013 |
Correction for window transmission losses in radiation thermometry using high temperature fixed points
1 National Physical Laboratory, Hampton Road, Teddington TW11 0LW, UK
2 CEA, DEN, Cadarache, STRI/LMA, 13108 St Paul lez Durance, France
3 Laboratoire Commun de Métrologie (LNE-Cnam), Saint-Denis, France
Monitoring processes taking place inside furnaces often involves measurement of temperature using a radiation thermometer looking through a window of unknown, and possibly varying, transmission. This can introduce significant errors. In this paper we consider two approaches to dealing with this problem based on a particular case using a vacuum induction furnace. The use of a ratio radiation thermometer is compared to measurements of a known reference point embedded in the process using a monochromatic radiation thermometer to generate a correction curve. It is found that an included reference can give a correction with minimal residual uncertainty.
Résumé
Les processus de suivi qui se déroulent à l’intérieur des fours implique souvent la mesure de température à l’aide d’un pyromètre en regardant à travers une fenêtre de l’inconnu, et peut-être variable, transmission. Cela peut introduire des erreurs importantes. Dans cet article, nous considérons deux approches pour traiter ce problème sur la base d’un cas particulier en utilisant un four à induction sous vide. L’utilisation d’un pyromètre à rapport est comparé à des mesures d’un point de référence connu incorporé dans le processus en utilisant une seule longueur d’onde de pyromètre pour générer une courbe de correction. Il se trouve qu’une référence inclus peut donner une correction avec un minimum d’incertitude résiduelle.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.