Issue |
2013
16th International Congress of Metrology
|
|
---|---|---|
Article Number | 10003 | |
Number of page(s) | 5 | |
Section | Impact environnemental / Environmental awareness | |
DOI | https://doi.org/10.1051/metrology/201310003 | |
Published online | 07 October 2013 |
A dissolved oxygen calibration bench
IFREMER, Institut français de recherche pour l’exploitation de la mer, LDCM, Centre de Bretagne, Technopôle de Brest Iroise, 29280 Plouzané, France
a Corresponding author: florence.salvetat@ifremer.fr
This paper presents a metrology bench dedicated to the calibration of optical dissolved oxygen sensors. This set up is used at Ifremer metrology laboratory to calibrate dissolved oxygen sensors integrated on oceanographic probes. The characterization of the bench is seen through the analysis of its stability and its homogeneity. An application is proposed on the calibration of Aanderaa 3835 and 4330 optodes.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.