Issue |
2013
16th International Congress of Metrology
|
|
---|---|---|
Article Number | 06001 | |
Number of page(s) | 4 | |
Section | Les avancées en mesure 3D et Dimensionnel / Advanced coordinate metrology & Dimensional | |
DOI | https://doi.org/10.1051/metrology/201306001 | |
Published online | 07 October 2013 |
Terrestrial Laser Scanner (TLS) equipment calibration
1 Department of Surveying Engineering and Cartography, km 7. 28031 Madrid, Spain
2 Cartography.Universidad Politécnica de Madrid Campus Sur. km 7. 28031 Madrid, Spain
3 Carretera de Valencia, km 7. 28031 Madrid, Spain
1 Corresponding author: te_fer@topografia.upm.es
2 Corresponding author: jvo@etsii.upm.es
3 Corresponding author: lcmigt@topografia.upm.es
The aim of this study is to develop the measurement procedures in order to evaluate the quality of the observations carried out using Terrestrial Laser Scanner (TLS) equipment. It tries, in addition, to estimate an uncertainty value that allows the users to know the reliability of the instrument measurements. The intention of this paper is to describe a working methodology, able to be reproducible, without the essential need of having a very complex infrastructure.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.