Open Access
| Numéro |
EPJ Web of Conferences
Volume 77, 2014
16th International Congress of Metrology
|
|
|---|---|---|
| Numéro d'article | 00014 | |
| Nombre de pages | 6 | |
| DOI | https://doi.org/10.1051/epjconf/20147700014 | |
| Publié en ligne | 19 août 2014 | |
- http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=68&cmp_cod=CCEM-K7&prov=exalead [Google Scholar]
- W. Sze, “An injection method for self-calibration of inductive voltage dividers,” J. Res. Nat Bur. Stand, vol. 72C, no. 1, 1968. [Google Scholar]
- D. N. Homan and T. L. Zapf, “Two stage, guarded inductive voltage divider for use at 100 kHz,” ISA Trans, vol. 9, no. 3, pp. 201–209, 1970. [Google Scholar]
- E.F. Dierikx, “AC Voltage Ratio Measurement at NMi.VSL”, Journal of Metrology of India, Vol. 18, No. 3, 2003; pp.183–189 [Google Scholar]
- F. Overney and B. Jeanneret “Realization of an inductance scale traceable to the quantum Hall effect using an automated synchronous sampling system”, Metrologia, 47, pp.690–698, 2010 [CrossRef] [Google Scholar]
- K. Grohmann, “A step-up method for calibrating inductive voltage dividers up to 1 MHz,” IEEE Trans. Instrum. Meas., vol. IM–25, no. 4, pp. 516–518, Dec. 1976. [CrossRef] [Google Scholar]
- R. Hanke, “An improved straddling method with triaxial guards for the calibration of inductive voltage dividers at 1592 Hz,” IEEE Trans. Instrum. Meas., vol. 38, no. 5, pp. 974–978, 1989. [CrossRef] [Google Scholar]
- O. Thévenot, “ETALONNAGE DE TRANSFORMATEURS ETALONS”, Mémoire de diplôme d’ingénieur C.N.A.M, 2003 [Google Scholar]
- B.P. Kibble & G.H. Rayner, “Coaxial AC Bridges” [Google Scholar]
- F. Delmas, “Caractérisation de diviseurs inductifs de 50 Hz à 20 kHz”, Bulletin d'Information du Bureau National de Métrologie, vol. 16, no. 59, pp. 23–31, 1985. [Google Scholar]