Comparison of internal and external threads pitch diameter measurement by using conventional methods and CMM’s
Published online: 2019-09-23
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
1667 171 (2026)
https://doi.org/10.1007/978-3-032-07721-9_16
A full-morphology measurement method and system for tubing internal thread based on rotating-mirrored structured light vision
Xiao Li, Jingyu Zhou, Wei Li, Xin Ma, Xin’an Yuan, Xiaokang Yin, Huaiyuan Chen, Xingpei Chen and Yanpeng YangMeasurement 242 115705 (2025)
https://doi.org/10.1016/j.measurement.2024.115705
1339 497 (2025)
https://doi.org/10.1007/978-981-96-2208-5_48
Advances in Manufacturing III
Bartłomiej Krawczyk, Krzysztof Smak, Piotr Szablewski and Bartosz GapińskiLecture Notes in Mechanical Engineering, Advances in Manufacturing III 89 (2022)
https://doi.org/10.1007/978-3-031-03925-6_9
Verification of a calibration method for 3D screw thread metrology
A Przyklenk, S Schädel and M SteinMeasurement Science and Technology 32 (9) 094005 (2021)
https://doi.org/10.1088/1361-6501/abead2
Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020)
I. A. ShchurovLecture Notes in Mechanical Engineering, Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) 240 (2021)
https://doi.org/10.1007/978-3-030-54817-9_28