Open Access
Issue
2013
16th International Congress of Metrology
Article Number 04007
Number of page(s) 6
Section Outils mathématiques / Mathematical tools
DOI http://dx.doi.org/10.1051/metrology/201304007
Published online 07 October 2013
  • Evaluation des donnees de mesures- Supplement1 du ≪Guide pour l’expression de l’incertitude de mesures≫- Propagation de distributions par une methode de Monte Carlo. JCGM 101: (2008)
  • K. Shimojima, R. Furutani, K. Takamasu, K. Araki, “The estimation method of uncertainty of articulated coordinate measuring machine”. XVII IMEKO Congress. Durbonvik, Croatia, (June 22-23, 2003)
  • J. Santolaria, A. Brau, J. Velazquez, J.J. Aguilar, “A self-centring active probing technique for kinematic parameter identification and verification of articulated arm coordinate measuring machines”. Measurement Science and Technology. Vol. 21 , 11PP, (2010) [CrossRef]
  • J. Santolaria, J.J. Aguilar, J.A. Yagüe, J. Pastor, “Kinematic parameter estimation technique for calibration and repeatabilitity improvement of articulated arm coordinate measuring machines”. Precision Engineering, Vol 32 , pp 251–268, (2008) [CrossRef]
  • H. Hamana, M. Tominago, M. Ozak, R. Furutani, “Calibration of articulated arm considering measuring posture”. Paper: AU5-2-4610, (2011/2/15)
  • J. Denavit, R. Hartenberg, “A kinematic notation for lower pairmechanism based on matrices”. ASME Journal of Applied Mechnics, vol. 22 , pp 215–221, (1955)
  • W. Khalil, E. Dombre. Modelisation identification et commande des robots- 2eme edition revue et argumentee), ch. 3, pp. 57–61 (Paris: HERMES, 1999)
  • F. Romdhani, M. Ge, P. Juillion, F. Hennebelle, J.F. Fontaine. “Consideration of the mechanical strain in a model of uncertainties quantification of a Co-ordinate Measuring Arm”. Congrès Français de Mecanique, Bordeaux, France, (August 2013)